Red RC » P On Road

January 11, 2019

LRP X22 Stock Spec & N.B. 6.5T Modified motors

LRP have announced the release of a full line of X22 Stock Spec brushless motors as well as the introduction of the X22 N.B. 6.5T modified motor especially for non-boosted modified classes. All motors use a precision-machined 7075-T6 aluminium can with the Stock Spec motors featuring additional machining for improved cooling and a lower weight. A machined window makes way for the laser-etched winding marking, ensuring easy identification while the aluminium backplate with machined pockets further enhances heat dissipation. The motors are rounded off by heavy duty solder tabs. As for the X22 N.B. 6.5T Modified motor, the power plant was developed especially with non-boosted modified racing in mind, a new class that ensures exceptional top speeds that are still manageable for us mere mortals. The motor builds on the X22 Stock Spec and features a 6.5T modified winding, an optimised rotor and adjustable 0 to 60 degree timing.

View more images here

January 11, 2019

Yeah Racing YD2S carbon & alloy rear shock tower

Made for Yokomo’s YD2S RWD drift car is a carbon fibre and aluminium rear shock tower from Yeah Racing. Constructed from high-quality carbon fibre and black anodised aluminium the shock stay offers an incredible amount of upper shock and camber link mounting positions, allowing to create complex setups. The part is a direct fit and available now.

Source: Yeah Racing [yeahracing.com]

January 11, 2019

Yeah Racing M07 carbon fibre bumper plate

Yeah Racing have announced another new carbon fibre option part for the Tamiya M07 in the form of a graphite bumper plate. Machined from high-quality material and coming including blue anodised alloy washers and steel hardware, the part was designed to replace the standard plastic plate for more durable and rigid solution that also adds a luxurious look.

Source: Yeah Racing [yeahracing.com]

January 11, 2019

Xray X1’19 hard 2.5mm graphite chassis

Coming from Xray is a new hard 2.5mm graphite main chassis plate for the X1’19 formula car. Machined from a harder carbon fibre material and being 2.5mm thick the chassis is meant to increase stability while eliminating oversteering, creating a car that is easier to drive in high to very high bite conditions. Due to its torsional rigidity and the narrow front end, the chassis also helps to eliminate the scrub effect during high speed cornering.

Source: Xray [teamxray.com]

January 10, 2019

Capricorn C803 EP Race Evo 1/8th electric kit

Coming from Capricorn is their new C803 EP Race Evo 1/8th electric on-road kit. Built to meet EFRA GP and Campionato Costruttori rules, the car is based off of the nitro-powered C803 Evo and it was designed to utilise either two 3S or two 2S square-type LiPo battery packs for a race-ready weight of around 2400g and the ability to run the kit in either 6S or 4S configuration. The car features a carbon fibre double deck construction for a low weight, a lightweight aluminium motor mount for industry-standard 1/8th brushless motors as well as a single gear gearbox, fully adjustable suspension and an adjustable carbon fibre battery mount.

View more images here

January 10, 2019

Yeah Racing M07 & M05 carbon fibre shock towers

Yeah Racing have released a range of carbon fibre shock towers for the Tamiya M07 and M05 kits. Available for the M07 are front and rear shock towers for standard length shock with the parts coming separately or as convenient combo set. Also made for the M07 is a dedicated combo set to utilise short TRF shocks. For the M05 come shock towers for standard length shocks – again separately for the front or rear or as combo set. All include precision machined carbon fibre shock stays and all necessary – steel and aluminium – hardware. Using the carbon shock towers will greatly improve suspension precision and efficiency due to them being much stronger than the standard plastic parts.

View the other new parts here

January 10, 2019

OfficinaRC Forza diff hardness tester

Coming from OfficinaRC, a new project of Monaco RC, is the Forza diff hardness tester. The device is meant to be the smallest diff tester to date and it was developed especially for 1/10th and Mini-Z size vehicles. The taster is powered via any USB output and it comes including a 1/10th scale compatible adapter with a Mini-Z-style coupler being available separately. Its design allows to measure diff hardness of both installed and stand alone units and thanks to its compact 86x38x29mm dimensions and the low weight of 85g it is easy to store and transport.

View the 1/10th scale and Mini-Z adapters here

January 9, 2019

Ielasi Tuned EFRA 2135 & 2669 pipe sets

Coming soon from Ielasi Tuned are the EFRA 2135 .21 off-road and EFRA 2669 .12 on-road exhaust sets. The Hipex-made tuned pipes offer a polished surface, etched Ielasi Tuned logos and they come including suitable manifolds for best possible performance.

View another image here