Red RC » P On Road

August 23, 2018

KO Propo Electrical Switch 3

KO Propo have introduced their new Electric Switch 3, an electronic on/off switch for nitro and gas-powered RC cars. The compact device measures 39.2×17.5×9.5mm and it weighs in at 10g. A two digit LC display allows to monitor the current and minimum receiver battery voltage and a LiPo protection mode ensures Lithium-Polymer-based batteries will not get deep discharged during operation. In addition the internal CPU will ensure maximum safety by preventing sudden connection looses due to voltage drops or overload. The translucent case ensures good visibility of all operation parameters and two mounting lashes make installation easy. The switch works with most transmitters and receivers and it is available from end of September.

View a list of the specifications and more images here

August 23, 2018

Blitz GT3 1/8th GT body shell

Coming soon from Blitz is their new GT3 body shell for 1/8th GT vehicles. Designed for 323mm to 328mm short wheelbase chassis with a track width below 313mm the body is of a more compact appearance. The included rear wing will provide exceptional downforce for improved car control at low and high speeds. The body is available in a standard 1.0mm and a lightweight 0.8mm variant including light decals, window masks and wing mounting hardware.

View more images here

August 23, 2018

Arena 1/10th 4WD touring car – Teaser image

Arena RC Racing have released a first teaser image of their forthcoming 1/10th 4WD touring car. The shaft-driven kit seems to target the competition market as it features front and rear swaybars, a floating servo mount, and widely adjustable suspension components. No official information apart from the image is available yet but we keep you up to date on the progress.

Source: Arena RC Racing [facebook.com]

August 23, 2018

MiniPro 2WD chassis dyno

Coming from MiniPro is a 2WD chassis version of their chassis dynamometer system. The device allows to measures the RPM, kV, voltage, current draw, power and torque output of vehicles up to 370mm wheelbase and 370mm width. This dyno is ideal for motor analysis, ESC and boost adjustment, brushless sensor adjustment, gearing calculation, tire selections, and much more. It is coupled with to a knurled roller via a pulley and belt to accelerate the inertial flywheel. The electronic board takes the flywheel’s inertia, measures the rate it takes to accelerate and calculates the output power and torque of the vehicle. The dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the engine’s power characteristics. The vehicle is stopped onto the dyno with adjustable belt stripes, allowing to use a multitude of different chassis such as 1/10th formula, 1/10th and 1/12th pan cars. The dyno is available including or without flywheel unit and it us usable with MS Windows 7, 8 or 10 PC systems.

Source: MiniPro [minipro.com]

August 22, 2018

Xpress Execute XM1S 4WD M-class chassis – Coming soon

Coming soon from Xpress is their Execute XM1S 4WD M-class touring car kit. The belt-driven car uses design elements of the XQ1S 1/10th scale tourer and it was developed for competitive racing, utilising a shorty LiPo battery as well as full-blown brushless components. The 210mm wheelbase car will use the Execute XQ1 series differentials, making for a sturdy and efficient drivetrain and full details will become available in time for the release that is schedule for end of September.

View another image here

August 21, 2018

Mon-Tech F18 formula body shell

After its debut at the recent 2018 IFMAR ISTC World Championship and Formula World Cup, Italian company Mon-Tech have officially revealed their all-new F18 formula body shell. Successfully used by winner, Jan Ratheisky, runner-up Dominic Quek and 4th placed Martin Hudy the body was developed to be lighter yet offer even higher performance thanks to optional side dams that not only look realistic but help to guide the air towards the rear wing better. The “underfloor” extends forwards the front suspension which further helps with aerodynamic efficiency, making the body pretty unique. The shell fits most 1/10th scale formula cars and it comes clear including add-on side dams.

View more images here

August 20, 2018

PSM TA07 SSBB carbon fibre shock towers

PSM have introduced their new 4mm carbon fibre shock towers for the Tamiya TA07R and Pro models. Designed to replace the standard plastic shock towers with more durable, precise and cooler looking items, the shock stays also feature a refined suspension geometry for better overall performance. The towers are of a low-height design for the use with SSBB shocks and they are available separately for the front and the rear of the car.

View the rear shock tower here

August 20, 2018

Marka Racing RK408 1/28 body shell

Coming soon from Marka Racing is their new RK408 1/28th scale body shell. The GT body will fit micro-size vehicles such as the Kyosho MR03, PN2.5, GL Racing GLA, Atomic BZ and others and it will be made from high-quality polycarbonate material for durability and a low weight. Also included will be a rear wing for increased rear traction and stability.

Source: Marka Racing [markaracing.com]