Red RC » P On Road

July 1, 2024

PIP-Aero Precut GT3 1:8 GT Body

German bodyshell producer PIP-Aero is now offering its 1:8 GT bodyshell in a pre-cut option. Looking at GT category, they noticed that there are way more hobby drivers than in 1:10 and 1:8 Nitro Onroad and with bodies more difficult to cut because of the dimension and the weight they made the decision to add a pre-cut option. This also make sure that they can use a perfect and straight mounted Body. The Precut version is for all actual brands (Serpent, Hongnor, Xray, Capricorn) and is the same cut for both Nitro and Eletric with Nitro drivers only having to make holes for the fuel and exhaust.

View side view here

July 1, 2024

Yokomo Drift Body Releases

With strong links with full size drifting, Japan’s Yokomo has released a number of new 1:10 body options for RC Drifting. First of these are pre-painted versions of the Pandem GR86 and Pandem GRA90 Supra. With these bodies the light/window decals are already applied, and wheel arches are pre-cut, so you can mount them by drilling holes for body mounts or using magnetic mounts. The car can be easily driven without time-consuming painting work. Yokomo has also re-released the popular Altezza and Z33 bodies for the Drift Package series. Both are sold as clear bodies with window decals only.

View more images here

June 28, 2024

Capricorn LAB GT2 GP Option Parts

Italy’s Capricorn RC has released two new option parks for its LAB GT2 GP 1:8 GT Chassis. Offering greater set-up options, they have release a hard version of the lower rear suspension arms which a cut from 5mm carbon fibre. Another new part is a front bumper stiffener, machined from aluminium. With an anodised finish in Capricorn’s distinctive trademark red colouring, the stiffener makes the front end much more resistant to any impacts.

View Bumper Stiffener here

June 27, 2024

MXLR TRF421 FlexBumper and Front Body Support

Germany’s MXLR has released a version of its FlexBumper and a Front Body Support for Tamiya’s TRF421 competition level 1:10 Electric Touring Car. The FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility and absorbs hits better and doesn’t transfer them as much into the chassis structure. More robust and sturdy, it always goes back to original shape and don’t drag on the floor after a crash. The MXLR FlexBumper for the TRF421 matches the original footprint, but with a lower overall profile! Also the front body post adjustment of the TRF421 is fully in function with their design, the bumper can slide back and forth depending on the used body post position. A direct replacement for the kit foam, the lower overall profile helps to keep the weight in an acceptable range. There are two MX logos on the backside to proof the originality.

Continue reading here

June 26, 2024

Hong Nor Pinion Gear Tool Set

World Champion 1:8 GT chassis manufacturer Hong Nor has released a new Pinion Gear Tool Set for the easy replacement of pinions. The set is used to replace the 1st and 2nd gear pinions on the clutch bell of the X3GT-61 Clutch Set.

View tool operation here

June 26, 2024

Roche P12V updated Chassis Plate

1:12 Specialist manufacturer Roche has introduced an updated main chassis for their P12V pancar. The new 7075 aluminium main chassis has a reduced material front section meaning less front weight and a reduce area that can touch the track surface. This changes gives improvement with the car’s steering response especially on high grip conditions.

View new and old chassis comparison here

June 26, 2024

RC Atomic BZ5 1:28 Belt Drive 4WD Competition Chassis

Specialist 1:28 manufacturer RC Atomic has released its long awaited new BZ5 1:28 Belt Drive 4WD Competition Chassis. Always aiming to provide racers with top level competition chassis they have been working hard following the BZ3 release in 2019. After years of experience with that car and listening to racers opinion around the world they have now fully re-designed their winning belt drive 4WD chassis and introduced the new BZ5 which gets all new bulkheads and motor mount, longer front Arms and new knuckles which give increased stability as well as more mid corner steering.

View full list of new features and more images here

June 25, 2024

T-Work’s Multi-function Bag w/Hardware Storage Boxes

New from T-Works is this Multi-function Bag complete with 10 Hardware Storage Boxes. The bag features double protection with Oxford cloth and waterproof lamination ensuring that tools and parts are properly protected in all environments. Built-in zipper pocket with removable compartment design you can adjust freely the layout according to your needs. Measuring 17.7×10.2×2.6cm, the transparent 15 compartment Hardware Storage Boxes allow you to quickly identify and access your parts providing you with a neat and organised parts management solution. On removal of storage boxes you have the option to adjust bag compartment space for tool and accessory storage.

View more images here