Red RC » P On Road

October 28, 2018

Team Silverback 5000mAh ultra low CG LiPo battery

Team Silverback have introduced their all-new 7.4V 5000mAh ultra low centre of gravity LiPo battery pack. The power source is made of G-Series graphene-technology cells for a very low internal resistance, high discharge rates, enhanced punch and maximum top speed. The hardcase pack measures 139x47mm at a height of only 19.5mm which makes for a very low overall centre of gravity. The battery weighs in at 235g and its capacity makes it ideal for medium-sized indoor tracks.

Source: Team Silverback [silverbackrc.com]

October 25, 2018

T-Works lightweight bearing kits

Coming from T-Works are four new lightweight bearing kits for vehicles such as the Xray GTX, Kyosho Inferno GT3, HB Racing RGT8 and Mugen MBX8 Eco. All use 8x14mm rubber-sealed bearings to replace the standard kit bearings for lighter ones. Using the lightweight bearings kits will reduce the unsprung masses for a more nimble handling and a lower overall weight. Also included in the sets are lightweight reducer bushings.

Source: T-Works [rc-tworks.com]

October 24, 2018

Blaze Racing CRC 1/12th scale Quad-link conversion

Coming from Blaze Racing is the Quad-link conversion for CRC 1/12th scale pan cars. Taking the read pod design of the larger Pro10 cars, the plug and play conversion uses two addition, smaller, links to replace the typical pivot ball. The construction is bind-free and allows to fine-tune the rear suspension geometry – something less common in 1/12th scale racing. In addition it optimises the rear roll centre for increased rear traction without sacrificing front end grip. The conversion consists of 7075 aluminium components and 3mm carbon parts, steel ball studs and composite links and it is usable on cars such as the CRC CK25.

View more images here

October 24, 2018

Infinity introduce new IF18 optionals

Infinity has introduced two new optional parts for its IF18 World Championship and Euro Nitro Series title winning 1/8th on-road nitro car. The first of the new releases is a Front Upper Suspension Shaft Set with a 3mm stopper. This not only improves strength and reliability during long finals but it also helps speed up maintenance time. The shaft itself is heat-treated high-strength spec with a polished finish.

Continue reading here

October 23, 2018

Picco Monza & Blast .21 engines

Picco from Italy have introduced their new Monza .21 Team on-road and Blast .21 Team off-road engines. Starting with the on-road engine, 3.5cc power plant features a newly designed crankcase that improves internal gas flow and produces a higher performance over the whole RPM range. The 14mm crankshaft utilises a silicone insert and it is DLC-coated in order to prevent wear of the pin as well as oxidation. The shaft rests in a high-quality rear ceramic Swiss-made bearing. The 7-port cylinder and piston is made using special alloys to optimise lifespan and reliability of the unit. Paired with the long stroke design the Monza provides great bottom end power to suit demanding high grip on-road tracks. The super-aligned knife edged aerodynamic connecting rod is also made with a special aluminium alloy. The carburettor sports the latest double bottom-end adjustment for fine-tuning.

Continue reading here

October 23, 2018

Roapex Rhythm & Trigger 1/8th tyres

HRC Distribution have introduced the new Roapex Rhythm 1/8th buggy and Trigger 1/8th GT tyres. Both are moulded from a soft-compound rubber for exceptional traction in average track conditions. The buggy tyre features a multi-purpose knob tread especially for softer tracks while the on-road tyre sports a scale-looking tread. Both tyres are available on black or black-chrome wheels and in sets of two.

View more images here

October 23, 2018

Yeah Racing TB Evo 7 & M07 titanium turnbuckle sets

Yeah Racing have introduced new titanium turnbuckle sets for the Tamiya TB Evo 7 and M07 kits. The TB Evo 7 specific set includes three M3x22mm and four M3x32mm turnbuckles as well as 14 15mm ball ends while the M07 set includes six M3x18mm and a single M3x105mm link along an assortment of 10mm, 13mm and 15mm ball ends. Using the sets will reduce overall weight while offering improved visual impact and durability.

View the M07-specific set here

October 22, 2018

Ruddog 48 pitch steel pinion gears

Coming from Ruddog Distribution are their new 48 pitch steel pinion gears. Available in a range of 18T to 27T the pinions are sold separately or in two different sets of five odd or five even tooth gears. The gears are precision made and are ideal for everyday bashing or racing.

Source: Ruddog [ruddog.eu]