Red RC » P On Road

December 7, 2023

MIBO CA Tire Glues & Activator Sprays

MIBO has added to its range of accessories with three new specially developed CA Tire Glues and two Activator Sprays. For Onroad classes with rubber tires, the onroad CA Tire glue’s low viscosity enables it to seamlessly permeate the tiniest gaps, ensuring a robust and dependable bond. The 20g bottle’s compact design ensures precise application, guaranteeing maximum control and accuracy during use. The Offroad glues medium viscosity provides a strong and reliable bond between the surfaces to be bonded, while at the same time allowing even the smallest of gaps to be penetrated without problems. Every offroad racer will also appreciate the larger, 50g pack in a compact bottle for maximum precision in glue application. Third option, the MIBO Racing Foam CA Tire Glue, is developed for classes with foam tires. The special viscosity of the glue results in a strong and reliable bond between the surfaces to be bonded. The CA Activator Spray dramatically speeds up the curing process with the Onroad spray coming in 150ml size with a bigger 200ml size for Offroad.

Source: MIBO [mibosport.com]

December 7, 2023

Hong Nor Soft Adjustable GT Clutch Shoe

Reigning 1:8 GT World Champion manufacturer Hong Nor has released a new soft compound Adjustable GT Clutch Shoe. The newly developed ‘Black’ adjustable clutch shoe is made of soft material allowing drivers to adjust the power of the car to suit the grips levels of different tracks.

Source: Hong Nor [hongnor-racing.com]

December 7, 2023

WMH Racing 550 Load Master | Analyzer Test Holder

Donathen RC has announced the addition of another two WMH Racing products, the 550 (4 pole) Load Master and 550(4pole) Analyzer Test Holder. The 550 Load Master is a device to be used with a motor analyzer to measure how your motor would work in real world conditions (like when it’s on the track). The 550 Analyzer Test Holder is designed to hold your 550 brushless motor, instead of using the alligator clips that come with the units. Features & specs for the Load Master are that it plugs into any motor analyzer and has colour coded wires to identify A, B and C poles, With vented sides it is supplied complete with 9″ motor wires and 275mm sensor wire as well as a Resistor bank and coupler. Made in the USA, the Load Master is supplied in a protective carry case.

View Analyzer Test Holder here

December 5, 2023

Infinity IF18-3 1:8 Onroad chassis

Creation Model has officially released its latest 1:8 onroad chassis, the IF18-3. In 2023 the long awaited IFMAR 1:8 Onroad World Championship was held at Infinity International Speedway in Japan where on its official debut 6 out of 10 IF18-3 cars advanced to the final, with team driver Dario Balestri being crowned 2023 IFMAR World Champion (see winning chassis focus here). The new IF18-3 was designed based on data from Infinity team drivers active all around the world and introduced by them during the 2023 World Championship. With increased rigidity and a lower centre of gravity, it has outstanding rear traction that significantly exceeds the previous model IF18-2. Armed with an all new brake system with improved control and drivability the IF18-3 successfully regained the championship title. It has multiple part revisions from the previous model, allowing for a wide range of settings with minimal changes to each component, making it adaptable to all track conditions. The IF series fuel tank, which has received high praise all over the world, guarantees a stable fuel supply. The new clutch extracts as much power as possible even from 16% nitro fuel, which is mainstream in Europe. The front area has also been improved and the lower suspension has improved crash resistance, now making it possible reproduce track width setup changes more quickly and easily. Of course, it maintains high compatibility with many existing parts, and the design allows you to continue using a wide variety of optional parts, so you can customise it to your liking.

View more images here

December 5, 2023

SkyRC B6ACneo Charger

SkyRC has released this smaller than a credit card B6ACneo Charger that sports a sleek design with vibrant colours, and boasts an impressive 200W charging capacity with DC power and 60W with AC. Surpassing the original B6AC’s 50W AC limit, the B6ACneo reduces charging time, maximising your time in RC action. Don’t let its downsized footprint deceive you – this charger packs a punch. When powered by DC it delivers a remarkable charging power of up to 200W with a maximum current of 10A. Even when connected to AC power it effortlessly fills up to 60W. The SkyRC B6ACneo features an XT60 interface as its DC input and Universal 100-240V AC input, ensuring greater flexibility and convenience in charging your RC batteries.

View more images here

December 4, 2023

Raceform 1:12 Perfect Wheel Arc Cutter

New from Singapore’s Raceform is their 1:12 Perfect Wheel Arc Cutter which is is specially designed for 1:12 racing making it their first ever onroad specific pit accessory. Adjustment from 40mm to 50mm Diameter, it is the only tool that is able to trim a perfect wheel arc over and over again without any hassle. The Secured Position Design ensures the tool does not move if 2 or more cut is required, eliminating 2nd cut line and it works with any standard hobby knife blade. Super safe as the cutting blade is not exposed during cutting, it is suitable for lexan up to 0.8mm and it eliminates the pain of damaging a wonderfully painted shell during trimming of the wheel arc.

View cutter mounted for arc cut here

December 2, 2023

Fenix Tyrrell P34 1977 body

Specialist RC Formula car producer Fenix Racing from Italy has made another addition to their F1 nostalgia bodyshell collection with the release of the iconic six wheeler Tyrrell P34 1977 body. The Tyrrell P34, was the first and only 6 wheel F1 raced and able to win a Grand Prix. Fenix Racing choose to depict the version raced in the second half of 1977, with the heavy modified nose, sporting oil radiators there and brake cooling NACA openings Currently the body is made to fit the Tamiya reissue, based on the F103 but Fenix Racing owners says he is pretty sure that, soon or later, someone will walk in his office saying… “Boss, I’ve had an idea. Let’s put 6 wheels in our F1-70”. Molded from high-quality polycarbonate, the body comes supplied transparent with decals, made in photo realistic level to give a proper rendition of the parts.

View front section image here

December 1, 2023

RCtarget Capricorn C804 rear body support

RCtarget has released a new carbon fibre rear body support for Capricorn’s latest 1:8 Onroad chassis that is designed to precisely follow the contour of your Xtreme Aerodynamics body. Made out of 4mm carbon fibre, the new rear support ensure a perfect support for the popular body shell. Additionally, the body mount is 43% lighter than the stock one, lowering a considerable large amount of weight in the highest part of the World Championship double podium finishing Lab C804.

View mounted fitted here