Red RC » P On Road

September 11, 2017

West Coast R/C Works BCE 1/12th body support

Coming from West Coast R/C Works is their new Black Carpet Edition front body support for most 1/12th scale pan car kits. The part was designed to prevent body scrub of 1/12th pan cars in high speed corners and on the straightway an issue that is generated by the air going over the body and bending the nose down until it touches the surface. The outcome of this is a reduced top and corner speed, and it even can lift the front wheels off the track. This is where the body support kicks in as it is designed to tackle this problem by supporting the nose of the body. It will reduce the body scrub to a bare minimum and allows to mount the body lower as before. The 1/12 body support is available in two versions, as 35 degree or 60 degree variant, and 3-D-printed from nylon. In 35-degree and 60-degree. The 35-degree version is designed for a body with a low angled nose like the AMR and the 60-degree version is made to support a body with a short nose like the BMR. The part is available in black and white from West Coast R/C Works’ Shapeways store and selected dealerships.

View another image here

September 8, 2017

Capricorn TE-03 V4 big bore shock absorbers

Coming from Capricorn and made for their TE-03 electric touring car are the V4 big bore shock absorbers. The shock body and shaft are 2mm shorter than the previous version, while the pistons feature a lip on their inner lower side to avoid the suction effect when they hit the bottom of the case, resulting in a more linear response. Used in combination with specific shock towers, the V4 shocks are meant to be used on carpet as they should increase the car’s responsiveness.

Source: Capricorn [capricornrc.com]

September 8, 2017

3DRC floating 25mm twin fan mount

Germany’s 3DRC have introduced their all-new twin fan mount for 25mm fan units. The 3-D-printed part is of a clamping design and it was developed to take two standard 25x25x10mm fans which makes for optimised cooling of the whole motor can when compared to single 30mm or 40mm fans while also ensuring a lower overall centre of gravity. The mount is best used in front of the motor and a large mounting patch ensures secure yet tweak-free mounting using high-quality double sided tape.

View another image here

September 8, 2017

Tamiya TRF419XR – Preview image

Tamiyablog have released a first blurry rendering of the forthcoming Tamiya TRF419XR touring car. The follow-up model of the TRF419X was developed with increased corner speed and steering response in mind and it will feature a redesigned 2.25mm carbon fibre chassis and 2.0mm upper deck for optimised chassis flex while the front and rear anti-roll bars finally received ball-raced mounts for a more precise action. Also included will be a new centre pitch stiffener to fine-tune chassis flex, a LF battery balance weight and also two sets of shock towers for standard and the included TRF super short big bore dampers.

Source: Tamyiablog [tamiyablog.com]

September 7, 2017

3DRC F6 front suspension flex arms

3DRC have introduced their new front suspension flex arms for the Team Associated F6 formula car. They are more flexible that the stock carbon fibre arms and improve the car’s handling over the stock parts. They also increase overall steering and look a bit more “scale-ish” than the standard sheet material arms. The 3-D-printed parts are 5mm thick for durability and they are available through 3DRC’s Shapeways store or select model shops.

View another image here

September 7, 2017

Roche P12’17 floating servo plate & spring retainer

Coming from Roche and made for the P12-2017 pan car are a new 1.5mm forward carbon fibre floating servo plate as well as 2mm offset DVS-W shock spring retainer. Starting with the servo mount plate the part is machined from high-quality graphite material and it positions the steering servo 1.5mm forward which makes for a better steering link geometry especially when running Sanwa micro servos but also the micro-size offerings of other brands. Also new is the 2mm offset shock spring retainer for the P12-2017. It fits the DVS-W shock and it allows for improved spring preload adjustment.

View more images here

September 7, 2017

Xray 64 pitch 72T & 75T pan car spur gears

Xray have introduced two new 64 pitch spur gears for 1/12th and 1/10th pan cars. They come in 72T and 75T specification and add to the already existing 76T to 96T gears. The smaller sizes are ideal for all stock racing classes and the gears come precision-moulded from high-quality composite material.

View the 75T gear here

September 7, 2017

Xenon Racing white VSS S3M touring car drivetrain belts

Coming from Xenon Racing are new white VSS S3M drivetrain belts for most of today’s electric competition touring cars. Available as S3M180 (60T), S3M186 (62T) and S3M189 (63T) rear belts as well as S3M507 (169T), S3M510 (170T), S3M513 (171T) or S3M516 (172T) front variants the belts will greatly improve the overall drivetrain efficiency due to their reduced friction. This is however on the expense of durability that is slightly lower compared to standard black belts.

View the rear belts here