Red RC » P On Road

May 11, 2017

Nosram HD StockSpec brushless speed control

UK Nosram distributors Schumacher have introduced the new HD StockSpec brushless speed control. The HD Stock Spec comes pre-installed with the all-new v5.1 software. This software is adapted to the new hardware and new vital features have been added to make it best possible for today’s need in Stock racing. Initial Drive Feel Compensation (IDFC) has been developed especially with Stock racing in mind to maximise the comfort of initial drive feel over the whole race. Activating IDFC will provide initial drive increments depending on the temperature of the motor. This innovative feature will help to match the same power feeling on throttle over the whole race. Users can either select no compensation or adjust more IDFC to match the desired feeling on throttle after the motor gets hotter and battery weaker. Newly developed Stock parameters for the timing allow to unleash the full power potential in all boosted classes. The new BDX-S break rounds off the package for Stock drivers. Four different brake types including BDX-S are now included, enabling maximum braking power with increased response for pin-point accuracy when entering tight corners. By the time of release, Nosram continues to use its well-known system for trackside adjustments with push buttons, with no need to use a separate programming unit. The Nosram HD speed control series however is designed to support external programming device which is planned to be offered later on.

View the specifications here

May 10, 2017

Yeah Racing Sakura D4 carbon fibre chassis & top deck

Yeah Racing have introduced an optional carbon fibre main chassis plate and top deck for the 3Racing Sakura D4 drift car. The main plate is cut from 2.5mm carbon fibre and it will stiffen the chassis assembly to get more grip out of the car with the same applying to the 2.0mm upper deck. The parts are usable on AWD and RWD kits and they are available separately.

View the top deck here

May 10, 2017

Ultimate Racing nitro engine throttle return spring

Modelix Racing have introduced the Ultimate Racing throttle return spring for .12 to .21 nitro engines. Attached to the carburettor throttle linkage ball the spring will ensure the carb is closed in the event of a lost or broken linkage or during electronic failures, sending the engine to idle and thus saving the vehicle from becoming uncontrollable. The spring is usable with on-road and off-road engines alike.

View the spring in place here

May 10, 2017

Radtec T4 Premium steel spool outdrives & C-blades

Radtec have introduced their newly designed Premium steel spool outdrives for the Xray T4 line of touring cars. Machined from high-quality spring steel and coming with a heat-treated surface for wear, the outdrives are of a dual design that allows to run the car with our without the included POM C-blades. Using the blades will make for a smoother overall feeling in corners and reduced wear while the direct design makes for a more aggressive feeling in corners on the expense of slightly increased parts wear.

View more images here

May 10, 2017

Kyosho TF7 front belt tensioner set

Coming from Kyosho and made for the TF7 touring car is a front belt tensioner set. A direct fit to the top deck of the car, the set includes a machined and red anodised aluminium mount as well as ball bearings, shims and bushings to create a class-standard tensioner that keeps the front belt from wobbling and skipping under load.

Source: Kyosho [kyosho.com]

May 9, 2017

Reds Racing VX 540 17.5T high torque brushless motor

Coming from Reds Racing is the new VX540 17.5T high torque electric brushless motor. Complementing the already existing 13.5T and 21.5T high torque variants, the motor offers a precision-machined 6061-T6 high airflow can, a balanced sintered rotor as well as low resistance solder tabs. The specially tuned motor will offer increased low-RPM torque while maintaining unchanged top speed, making it ideal for tracks that requires both lots of bottom end power and speed.

Source: Reds Racing [reds-racing.com]

May 9, 2017

LRP tease X22 540-size brushless motors

LRP have released first information on their forthcoming X22 electric brushless motors. Follow-up model of the successful X20 series, that has won three World Championships, multiple European and National as well as ETS and EOS titles, the motors will sport an updated, ultra-lightweight and precision machined 7075-T6 aluminium housing with maximised cut-outs and additional openings on the flat parts to further increase the cooling surface and lower the running temperatures due to improved airflow even at maximum loads. The most noticeable change has been made at the surface of the housing. The X22 comes with the “dark shine black” anodising with X22 engraving that will make it stand out in every chassis.

Continue reading here

May 9, 2017

Fenix introduces new touring & pan car CF options

Italian company Fenix has introduced new carbon fibre main chassis for the Team Associated TC7.1, Xray X1, Fenix Mistral as well as an adjustable front end plate for the VBC Lightning 10-235. Starting with the TC7.1 chassis, the main plate is cut from 2.5mm quasi isotropic carbon fibre, it is 85mm wide and weighs in at just 59g. It features a slotted design as known from Fenix’ alloy chassis and using the main in low grip conditions will improve traction and handling.

Continue reading here