August 3, 2017

Muchmore Impact LCG Max-Punch 4300mAh LiPo pack

Muchmore have expanded their range of high-performance LiPo batteries by the new Impact LCG Max-Punch FD2 4300mAh 2S pack. Measuring 95.8×46.8×22.5mm and weighing it at 192g the battery is of a low-profile design while the high-performance 120C cells make for exceptional power output in modified and stock classes. The hardcase battery utilises standard 4mm bullet-type connectors and it will hit stores very soon.

Source: Muchmore [muchmoreracing.net]

August 3, 2017

Yokomo YD-2S Plus RWD drift kit

Yokomo have introduced the YD-2S Plus, the latest addition to the popular YD-2 series of drift cars. Based off of the standard YD-2 the 2S Plus will feature a redesigned motor and transmission section with the motor being mounted in a high, rearward facing position for improved traction especially on very slippery surfaces. The chassis is of a new design, taken over from 1/10th buggies, with a carbon fibre main plate and composite side rails, doing away with the common top deck. The construction will result in improved steering control and optimised dynamic weight distribution. The kit will utilise shorty battery packs only and it will hit stores at about mid to end of September.

View more images here

August 3, 2017

Team EAM 1S 6100mAh Graphene LiPo battery pack

Team EAM have introduced their new Graphene series 3.7V 1S 6100mAh LiPo battery pack. The all-new Graphene formula was designed for the lowest resistance and high voltage output all in combination with improved reliability. The hardcase pack weighs in at 153g and utilises 5mm bullet connectors.

Source: Team EAM [teameam.com]

August 2, 2017

Yeah Racing YD2 Performance Upgrade Kit

Yeah Racing have introduced the Aluminium Performance Upgrade Kit for the Yokomo YD2 drift car. The set includes a wide range of option parts such high adjustability front and rear shock towers, a RWD large angle steering system with carbon steering plate, a high centre of gravity motor plate, width adjustable front and rear lower A-arms as well as front upper arms, a front bumper support plate and also 44mm to 54mm large angle adjustable steel and aluminium universal drive shafts. The suspension and steering parts are cut from high-quality aluminium, they come black anodised and engraved for easy identification.

Source: Yeah Racing [yeahracing.com]

August 2, 2017

One ride height & droop gauge set

Coming from One is a ride height and droop gauge set. Machined from aluminium and coming black anodised and with white easy-to-read markings the set includes a pair of 20mm chassis blocks, a 3mm to 10mm ride heigh gauge as well as a -5.5mm to 10mm suspension droop gauge. Both utilise 0.5mm increments for precise measurement and adjustment.

Source: Capricorn [capricornrc.com]

August 2, 2017

Muchmore Fleta ZX V2 ER Fixtiming Spec BL motor

Muchmore are busy adding more variants of the all-new Fleta ZX V2 brushless motor to their portfolio. The latest outcome is the ER Fixtiming Spec motor that builds on the same teardown as the Type-ER but its fixed timing design makes it ideal for spec racing classes and as handout motor. It comes as 13.5T, 17.5T and 21.5T variant and will hit stores very soon.

Source: Muchmore [muchmoreracing.net]

August 1, 2017

Zen Racing AE-style rear slide pivot mount

Zen Racing have introduced the Team-Associated-style rear slide pivot mount usable on a range of pan cars. The piece allows to use the new AE-style pop-on pivot ball holder on any car using the old style fixed pivot. All that is needed apart from the pivot mount will be Team Associated’s #4728 for the pivot ball holder to use this centre pivot mount.

Source: Zen Racing [zen-racing.co.uk]

August 1, 2017

Serpent Project 4X shorter carbon roll damper supports

Serpent have released a set of shorter 7mm roll damper supports for the Project 4X touring car. The parts are machined from carbon fibre and due to being slightly shorter they will change the front suspension geometry in a way that they make for a more responsive car in most conditions. Included in the set are two support plates.

Source: Serpent [serpent.com]

Mibosport
VP Racing
T-Works