Red RC » P On Road

September 23, 2016

Arrowmax 4500mAh 11.1V 40C LiPo battery pack

Coming from Arrowmax is their latest high-performance LiPo battery pack in the form of a 4500mAh 3S variant. Built using the latest generation of heavy duty 40C/80C cells with improved electrolyte composition and new high-density stacking the battery offers exceptional performance and durability even in demanding applications such as 1/8th and 1/10th on-road and off-road cars. What makes the 11.1V battery special is the reduced height of 25.1mm, making the 3S pack as large as a standard 2S battery. This leads to weight advantages over a standard 3S pack, allowing for higher performances especially in 1/8th scale vehicles. Another feature is the unique balancer power that is hidden behind a removable silicone cover. The features list is rounded out by 5mm bullet-type tube connectors for improved power supply.

View more images here

September 22, 2016

Reedy Zappers LiHV & LiPo shorty battery packs

Reedy have announced the release of their new Zappers high-performance LiHV and LiPo battery packs. At 7.6V the LiHV pack offers a higher voltage than the standard 7.4V pack, meaning increased performance during bashing or when racing “outlaw” classes. The battery can be safely charged to 8.7V and even when the typical 8.4V charging limit is enforced, the battery still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. Available as 4800mAh 7.6V LiHV and also as 4400mAh 7.4V standard LiPo pack, both make use of 5mm bullet-type connectors with the standard voltage pack built to meet ROAR, EFRA, BRCA and IFMAR specifications.

View the standard LiPo pack here

September 22, 2016

Serpent Project 4X 1/10th 4WD touring car kit

Serpent’s long-awaited Project 4X 1/10th 4WD electric touring car kit is finally ready for release. The revolutionary car that finished third overall in the hands of Serpent’s Viktor Wilck at this year’s IFMAR Electric On-road World Championships utilises many unique features that make for a very low centre of gravity while being easy to work on and reliable at the same time. The car makes use of a new suspension design that allows to adjust chassis roll and pitch independently for increased corner speeds and exceptional bump track handling. Sporting only one heave/pitch damper in the front and rear, the pull-rod actuated units are very small and thus light of weight while their mounting position just above the chassis makes for a low centre of gravity. The heave dampers affect mainly bump and on/off-throttle handling and they are easy to reach from the bottom of the chassis for convenient setup and maintenance tasks. The ride height settings are performed using a simple one-screw setup. The rocker and pull-rod system is ball-raced for highly precise damper action and a low wear.

Continue reading here

September 22, 2016

Xray X12’17 1/12th scale pan car kit

Xray X12'17 1/12th scale pan car kit

Just in time for the forthcoming indoor season Xray have introduced the 2017 variant of their successful X12 1/12th scale pan car kit. Building on the multi-time national and European Championship winning X12 platform, the 2017 variant features a sensible amount of refinements and new features with the car being based on a new 2.5mm carbon fibre chassis that is of a narrower design to reduce chassis scrub during hard cornering and to achieve a more centralised weight distribution. Despite its narrow width the chassis still allows for transversally or inline mounted battery packs, giving a range of weight distribution options for both lower and higher bite tracks.

Continue reading here

September 21, 2016

Active Hobby introduce new TA07 Pro option parts

Active Hobby introduce new TA07 Pro option parts-1

Coming from Active Hobby and made for the TA07 Pro club-level touring car are several aluminium and carbon fibre option parts. First up is a transversal aluminium chassis stiffener that connects the outer chassis side rails for improved torsional stiffness. The part comes machined from high-quality aluminium, in blue or black colour and it includes mounting hardware.

Continue reading here

September 21, 2016

Arrowmax black/golden 1/10th on-road car stand

Arrowmax’s previously released limited edition “ISTC World Championship” car stand is now also available in a standard variant, keeping its signature black and golden colour scheme but coming with Arrowmax logos over the previously used Worlds graphics. Made from anodised aluminium and machined carbon fibre the car stand measures 200 x 108 x 30mm and thanks to its compact dimensions and light weight it is easy to store and transport. Foam strips do away with scratching issues on both the chassis plate table surface and they also keep the car stand from sliding all over the place.

View more images here

September 21, 2016

Muchmore Tweak Master Ver.3

Muchmore have introduced the Tweak Master Ver.3 anti-tweak tool. Building on the design of the previous version the new Ver.3 is of a thinner and lighter design with the tweak rod diameter being now at 11.9mm compared to the Ver.2’s 16.4mm. The anti-tweak rod still features three machined holes for the antenna, motor mount post and spur gear and it sports newly designed black and silver colour end caps for a different look. Included comes a glass tweak board and also a handy carrying bag for easy storage and transportation.

View another image here

September 20, 2016

Serpent 748 V2 gear differentials & belt pulley set

Serpent have introduced the new V2 gear differentials and belt pulleys for the World Championship winning 748 1/10th 200mm nitro on-road car. Starting with the differentials, the V2 variant features an improved design with the case offering a greater oil volume for improved consistency during long runs and a new bleeder hole makes building, setup and maintenance much easier. Also part of the package are deeper profile gears with optimised gear fitment and super lightweight spring steel diff axles. On top of this the new diffs, that are available as separate front and rear variants, feature moulded-in steel bushings for additional stability and durability and they must be used with a longer side belt and the new V2 belt pulleys, described below, that offer a larger diameter for improved efficiency and acceleration. The pulley set is available in a black colour standard and white colour low-friction variant.

View the other new parts here