Red RC » P On Road

September 2, 2016

Vigor BD7 bulkhead spacers & steering wheel pads

Vigor have introduced new fine-tune bulkhead spacers for the Yokomo BD7-2016 car as well as high-grip steering wheel pads. Staring with the spacer set, already introduced in 1.0mm and 1.5mm specification the new 0.5mm and 0.8mm set allows for finer steps of bulkhead and motor mount raising. Using the spacers improves chassis flex and roll, meaning greater traction depending on the track conditions. As for the high-grip steering wheel pads, the rings are made of a special soft plastic that is available in eight colours and that is very easy to clean despite the bright colours.

View the steering wheel pads here

September 2, 2016

Serpent Viper 977 Rear End Upgrade set

Serpent Viper 977 rear end upgrade set-1

Coming from Serpent and made for the Viper 977 1/8th on-road kit is the Rear End Upgrade set. Usable on the standard 977 and also the Evo, the included parts move the inner hinge pins closer to the centre line of the chassis which in combination with longer pivotballs makes for effectively longer suspension arms. The upgrade results in more overall traction, a more stable rear end both under acceleration and braking and thus overall higher corner speeds. The set includes new main bearings blocks, rear plate, suspension brackets and shock mounts as well as longer steel pivot balls, a new carbon fibre camber bracket and it is rounded out by longer camber rods, ball joints and pivot balls.

View more images here

September 1, 2016

Sanwa HVS-702 servo & RX-481WP receiver

German Sanwa distributors LRP have introduced the HVS-702 low-profile servo and RX-481WP receiver. Starting with the servo, the high-voltage compatible item offers up to 8.6kg-cm of torque at a speed of down to 0.07s, making it ideal for nitro and electric touring cars as well as 2WD and 4WD buggies. It features a metal geartrain, dual ball bearings and it is SHR mode compatible. Also new is the waterproof RX-481WP 2.4GHz 4-channel receiver. It features an internal antenna for improved durability and easier wiring, it is SSL and FH4/FH3 mode compatible and it weighs in at 10.7g. The receiver is compatible with transmitters including, but not limited to, the M12X, M12, M11X, MT-4S, MT-4 and MT-S.

View the receiver here

September 1, 2016

LRP FlowX speed controller – Exclusive preview

Following Ronald Volker’s World Championship victory in China, LRP revealed to Red RC that Ronald was using the all new FlowX speed controller in his Yokomo as well as giving us the opportunity to photograph the new speedo which is set for release later this year. A driver who has shown great loyalty to the German brand even during some tough product development periods, the new speedo is very much a joint effort between LRP and Volker. Working with electronics engineer Aleš Dobnikar, Volker made a point of thanking LRP for their “hard work” praising them on the “progress they have made” recently. Although they have won many World titles, LRP boss Jürgen Lautenbach, who was in Beijing, said “this one is special”. Technically the new FlowX is the evolution of the highly popular Flow WorksTeam speed controller with whom the prototype, ran by Ronald, shares its case but the full production version will sport an all-new case whose prototype you can see in our images. When it comes to the technical specifications and software features LRP remain very tight-lipped for now, just stating that the new ESC “pushes the boundaries of speed control technology in every aspect”. The new FlowX speedo is due for release later this year when the full technical details will also be made available.

View another image of the new FlowX here

September 1, 2016

Yokomo Racing Performer Ultra LCG 5000mAh LiPo pack

Yokomo have introduced the Racing Performer Ultra LCG 5000mAh LiPo battery pack. The hardcase battery pack weighs in at a lightweight 274g, making for a perfect chassis balance while the high-performance 70C/140C cells allow the use in both competitive stock and modified racing. On top of this the low profile design makes for an overall lower centre of gravity when compared to standard 25.1mm tall packs. The battery, that utilises 5mm and 4mm connector tubes, becomes available by mid-September.

Source: Yokomo [teamyokomo.com]

September 1, 2016

New Protoform pan car bodies & Formula wings

Protoform have introduced a range of new 1/10th and 1/12th scale pan car bodyshells as well as front and rear wings for Formula cars. First up and coming in time for the indoor carpet season is the new BMR-12 1/12th scale body, an addition to the popular AMR-12. The new design features a front splitter and enhanced dive planes on the front fenders for increased front end rigidity and reduced body rubbing. The design features a cab-forward cockpit, simulated roof intake and a unique half-fin and in testing BMR-12 decked out car offered more rotation, more high speed steering, and more corner speed, all without sacrificing stability. The body fits all EFRA/IFMAR, BRCA, ROAR and JMRCA body specs and is offered in both light weight .020″ Lexan for experts and regular weight .030″ for novices. It comes with protective film and includes window masks and a decal sheet.

Continue reading here

August 31, 2016

SRP Ultra ceramic ball bearings

Spanish brand SRP have introduced their new Ultra ceramic ball bearings. The ball races use high-quality and highly precise Si3N4 balls to ensure a low friction while the dual metal and rubber shields make for both reduced transmission drag and protection from debris. Currently two sets are available, a 14-piece kit containing eight 5x10x4mm bearings, four 10x15x4mm bearings and two 5x8x2.5mm bearings and also an 18-piece set with all of the above plus four 5x8x2.5mm ball races. Both sets are suitable for most of today’s electric touring cars.

Source: SRP [srpqualityproducts.com]

August 31, 2016

JFT 1/12th pan car control foam tyre

JFT have introduce their new control foam tyre for 1/12th scale pan cars. Spec foam tyre are best known in 1/10th World GT racing where the purple-marked rubber makes for less guess work during scrutineering and they made a first step into 1/12th scale racing courtesy of CRC with JFT being another brand to offer “hand out” control tyres. The pre-mounted and pre-trued tyres come with a blue stripe for easy identification and they are mounted to grey standard off-set 1/12th scale rims suitable for most cars.

View the rear tyres here