Red RC » P On Road

February 14, 2016

Speedzone Elite Series brushless motors

Speedzone have introduced their new Elite Series brushless motor to compliment the Peerless Series. With a more linear feel, this latest offering allows a user to have every available motor option to suit track conditions and racing environments. A variety of turns are available and each motor is built to the highest quality and tolerance. Motors are bench tested to ensure sensor, stator and the ball bearings are all functioning to a strict quality control. Symmetrical vent openings in conjunction with the case and stator structure reduces motor temperature and maximises efficiency during an operating cycle. It also allows for easy stator measurement without disassembly. The Spec motors are produced with a short stator and HT rotor while the Modified motors come with a standard size stator.

View the features and more images here

February 14, 2016

STRC 17mm aluminium wheel nut wrench

Coming from ST Racing Concepts is a 17mm aluminium wheel nut wrench. The wheel nut wrench is machined from high-quality aluminium in a two-piece construction. The lightweight slotted shank component of the wrench keys into the drilled light weight wrench handle and it is secured in place by four steel screws. The wrench is also long enough to provide good clearance for the hand when used on wheels with deeper off-sets. The tool is available in two-tone anodising of a black handle combined with blue, gun metal, red, or silver bodies.

View more images here

February 12, 2016

Xray T4 adjustable hard carbon fibre top deck

Coming soon from Avid and made for the Xray T4’16 is the adjustable 2.0mm hard carbon fibre top deck. The first of its kind, it allows to adjust the twisting stiffness in the front, simulating a 0.5mm soft top deck all the way to a 2.2mm hard top deck by simply sliding a clamp back and forth in the front. The rear section of the TD also allows a clamp adjustment which is only capable of stiffen the rear for advanced setup gurus. Five small position holes have been added on each rail to help with precise adjustment changing and monitoring and the deck is cut from 100 percent premium carbon fibre with layup angles balanced left and right to insure equal twisting resistance side to side. The top deck is recommended for use on all conditions, it fits the T4’16, ’15 and ’14 and it includes the upper deck, clamp, and an Avid mini decal.

The adjustment is explained here

February 12, 2016

Reedy Zappers high-voltage LiPo batteries

Team Associated have introduced the Reedy Zappers high-voltage and high-performance battery packs. Originally referring to Reedy’s proprietary NiMH voltage enhancement technology, the new LiHV batteries offer a 7.6 nominal voltage which means that, with a suitable charger, the battery can be safely charged to 8.7V or 4.35V/cell. This makes the batteries ideal for outlaw racing series or bashing. When the typical 8.4V or 4.2V/cell charging limit is enforced, the battery still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. For those who race where approved batteries are required, 7.4V Zappers packs are available and feature the same discharge curve characteristics as the 7.6V versions. Each pack features a high-quality, durable hardcase that helps prevent damage while heavy-duty 5mm socket connectors keep power-robbing resistance to a minimum. Pass-through sockets reduce jumper wire lengths in applications where two batteries are utilised. The 7.6V packs are available as 6000mAh (277g) and 8000mAh (329g) variant while the 7.4V packs come in 5600mAh (277g) and 7400mAh (329g) specification.

View the other new battery packs here

February 12, 2016

Fenix X1 & SF2 aluminium chassis parts

Fenix have released new optional chassis and pod plates for the Xray X1 and Serpent SF2 formula car kits. Starting with the X1 chassis, it was designed to be way slimmer than the original, reducing scrubbing during hard cornering. Thanks to strategically machining the chassis weighs in at about 76g and it offers a good balance between torsional flex and rigidity. Also available is a suitable aluminium motor pod. Made as a direct replacement for the standard carbon fibre parts are the aluminium chassis and motor pod for the Serpent SF2. Machined from 7075-T6 aluminium and coming black anodised the parts make for different flex characteristics which can be beneficial in a range of track conditions. Additionally Fenix have also announced the Rattlesnake chassis conversion kit for the SF2 that allows to run the desired cross battery position. Included are the chassis, motor pod plate, upper plate and crossbrace.

View more images here

February 11, 2016

Destiny RX-10S 1/10th touring car kit

Following a couple of prototype images, Destiny have released a handful of production kit images of their all-new RX-10S 1/10th touring car kit. At the first glance the car is of a class-standard design with a double deck carbon fibre chassis, different chassis flex options and low-profile big bore shock absorbers. A bit of a difference though are the lower wishbones with honeycomb-shaped reinforcement struts, as well as the rail-type steering and hex adapter design, with the latter two reminding of the design used on a certain Russian touring car. Other features of the RX-10S kit include specially coated spring-steel driveshafts, C-hubs with caster inserts, POM damper pistons, as well as a lightweight composite front spool. It is understood that the first batch of the kit is ready for shipment, meaning the car will hit the stores shortly.

View more images here

February 11, 2016

HRC Racing TSW low-friction spur gears

HRC Distribution have introduced their new HRC Racing TSW low-friction spur gears. Machine-cut from high-quality Delrin for the highest precision and ultra low friction the spur gears are designed to fit almost every current 1/10th electric touring car with 3 or 4-screw spur gear adapter. The gears are available as 48 pitch 72T to 90T variant as well as 64 pitch 80T to 120T gear.

View the 64 pitch gear here

February 11, 2016

STRC 5.5mm & 7.0mm aluminium nut drivers

New from ST Racing Concepts come lightweight aluminium nut drivers. CNC-machined from a single piece of aluminium, the nut drivers are cut to a perfect tolerance while also featuring knurled handles for a secure grip and ease of handling during use. The drilled hollowed centre makes for great weight reduction. They are available as 5.5mm variant for M3 nuts as well as 7.0mm wrench for M4 wheelnuts. Additionally the 5.5mm nut driver features a thinned wall construction so it can fit into narrow locations, such as STRC’s 17mm hex adapter kits. They are available in a large variety of anodised colours including blue, light blue, black, gun metal, green, red, and orange and they are sold individually or as combo packs including the 5.5mm and 7.0mm tool.

View the colour variants here