Red RC » P On Road

March 1, 2016

Bezerk RC TRF102 carbon fibre T-plate

Coming from Bezerk RC is a carbon fibre T-plate for the Tamiya TRF102 formula car. The plate is made from 1.6mm glossy carbon fibre and it has been redesigned to add much needed strength over the standard item. Even though it is cut from less flexible carbon instead of FRP, the slotted design has similar flex characteristics to the Tamiya 1.8mm version. Testing has shown it to offer a more predictable handling with the carbon also showing a better consistency over the race distance.

Source: Bezerk RC [bezerk.com.au]

February 29, 2016

RSD RR12V2 & T4 aluminium main chassis

Following the 7075-T6 aluminium main chassis set for the Xray X12’16, Reflex Racing also introduced a specific variant for the RR12V2 as well as an alloy chassis for the Xray T4 line of touring cars. Starting with the RR12V2 alloy chassis kit, the set includes a black anodised and strategically milled chassis that ups the weight of the car by roughly 20g which in turn can be reduced by using lightweight electronics, screws and accessories. The chassis was developed to bring the centre of gravity as low as possible and it also includes a matching, thin carbon fibre rear lower pod plate.

Continue reading here

February 29, 2016

RSD X12’16 aluminium chassis conversion kit

RSD X12'16 aluminium chassis conversion kit

Available soon from Reflex Racing is the RSD aluminium chassis conversion kit for the Xray X12’16 1/12th scale pan car. Cut from 7075-T6 aluminium and coming black anodised and with machined silver edge details the chassis weights roughly 80 gram so the car will be around 20 gram heavier than in stock trim but the use of lightweight electronics, screws and accessories will help to bring the car near to minimum weight again to achieve maximum performance. Include in the chassis set, that was designed to bring the car’s centre of gravity as low as possible, is also a thin lower pod plate to match the chassis’ reduced thickness. The conversion kit will become available by mid-March.

Source: Reflex Racing [reflexracing.net]

February 29, 2016

Muchmore Lightweight Setup Board 2

Coming from Muchmore is the Lightweight Setup Board 2 for 1/10th and 1/12th scale vehicles. Measuring 420x320x12mm the board is made from hard wood and it features easy to clean hard plastic surfaces on both sides. Coming soon are also suitable stickers to allow for personalisation of your choice.

Source: Muchmore [muchmoreracing.net]

February 29, 2016

Maclan Racing MR8 1/8th brushless motors

Maclan Racing have introduced their all-new MR8 series of 1/8th competition brushless motors. Designed from the ground up for 4S LiPo racing classes, the completely rebuildable motors feature a machined heatsink design can, oversized precision ball bearings, heavy duty solder tabs and and a sensored, fixed timing design. The MR8 is available in a 1950kv and a 2150kv variant.

View the features and more photos here

February 26, 2016

Motiv RC Defy 3900mAh thin shorty LiPo pack

Motiv RC have introduced the Defy series thin shorty LiPo battery pack. Built from high-quality +65C cells with a capacity of 3900mAh the lightweight battery gives the capability to lighten up the overall weight of the vehicle and also effect the CG greatly by adding back the weight underneath the battery. It has the capacity to power Stock and Modified Buggies alike and it is 55g lighter than its Motiv RC 5000mAh counterpart.

Source: Motiv RC [motivrc.com]

February 25, 2016

HRC Racing 68112DL & 68113DBL low-profile servos

HRC Distribution have introduced two new low profile servos. The HRC Racing 68112DL (0.09s/12.0kg-cm) and the 68113DBL (0.07s/13.0kg-cm) both utilise nylon fibre and aluminium cases, they feature double ball bearings and a sturdy metal gear drivetrains, with the 68113DBL also coming with a powerful brushless motor, making for even swifter transit times and increased torque. The servos are usable with 4.8V to 6.0V input and they use standard 25T spline servo arms.

View the other new servo here

February 25, 2016

Spec-R T4’16 2.25mm carbon fibre chassis plate

Spec-R T4'16 2.25mm carbon fibre chassis plate

Coming from Spec-R and made for the Xray T4’16 touring car is a 2.25mm carbon fibre chassis plate. Cut from high-quality carbon fibre the chassis is of a fully symmetrical design with the milled motor pocket also apparent in the battery compartment to make for equal left-to-right flex characteristics. The chassis is a direct replacement for the stock part and available soon.

Source: Spec-R [spec-r.com]