Red RC » P On Road

May 23, 2016

Fenix Racing DFV2 stock brushless motors

Coming from Fenix Racing are the DFV2 electric brushless motors. Building on the popular DFV the version 2 offers a redesigned can with additional cooling openings for a lower operation temperature and more consistent performance over a run. Also new are an updated stator with improved wiring and a new epoxy-balanced rotor with 5mm front bearing and improved magnetic strength. Available as 13.5T and 21.5T variant the motors are built to meet EFRA specifications with the company currently seeking homologation for the 21.5T motor to make sure it is legal to race at the forthcoming Euros.

View another image here

May 23, 2016

Roche Rapide F1 2.25mm carbon fibre chassis

Roche have introduced two new option parts for the Rapide F1 formula car. First up is the new low-traction carbon fibre chassis cut from 2.25mm material and best used on slippery asphalt tracks. The chassis was tested by Roche’s Olivier Bultynck at the recent fourth round of the ETS and it is complemented by the second new part, a suitable 2.25mm carbon fibre lower pod plate. The latter is necessary to achieve a properly aligned power pod when running the 2.25mm main chassis plate.

View the rear pod plate here

May 21, 2016

Team Yokomo precision machined titanium screws

New from Team Yokomo are these precision machined titanium screws. Raising the bar when it comes to innovation and quality, Yokomo we are pleased to announce the finest precision machined titanium screws ever released in RC. These are precisely machine ground and cut to complete perfection and offer a true fit, which will see these screws never wear or deform like many other cheap titanium screws available. Yokomo will offer these in single type packs, or in kit form for each of their on and off road vehicles.

Source: Yokomo [teamyokomo.com]

May 20, 2016

Yokomo BD7 alloy battery guides & steering limiters

Yokomo have introduced new aluminium option parts for the BD7-2016 touring car in the form of aluminium battery guides and steering limited screws. The battery guides, that are also usable on the 2015 car, make for a more secure mounting of the battery pack while adding a factory look thanks to their black anodised surfaces and machined silver edges. On top of this the mounts also make for an improved weight balance when used with lower capacity batteries. As for the steering limiter screws, the machined alloy parts screw into the top of the Ackermann arms, they come as pairs and are available in 8.0mm, 8.5mm and 9.0mm diameter to mechanically limit steering travel which can reduce wheel chatter at high steering angles. All parts become available by end of May.

Source: Yokomo [teamyokomo.com]

May 20, 2016

Yaiba lightweight 64 pitch pinion gears

Tresrey have introduced the Yaiba 64 pitch aluminium pinion gears. Made from high-quality 7075 aluminium and coming machined to the lowest possible weight the gears offer a hard-anodised surface for low friction and high durability. The gears are laser-etched for easy identification and they are available in extra-large 40T to 60T sizes from end of May.

Source: Tresrey [tresrey.com]

May 20, 2016

Exotek 1/8th & 1/10th titanium wing buttons

Coming from Exotek are titanium wing buttons for 1/8th and 1/10th scale vehicles. The 1/8th XL wing buttons offer the same design as their aluminium counterparts but they are made using the somewhat exotic titanium material. Measuring 22mm in diameter the XL buttons are ideal for 1/8th buggy and truggy wings and they offer a polished and laser-etched finish. Also new are the 16mm diameter Flite series titanium wing buttons for 1/10th scale vehicles. Made from high-quality titanium, coming polished and laser-etched, the buttons, that use 3mm countersunk screws, are ideal for off-road and on-road vehicles alike.

View more images here

May 19, 2016

UFRA Wet 1/8th & 1/10th foam tyres

Coming from Swiss company UFRA is a new line of wet weather foam tyres for 1/8th and 1/10th scale on-road cars. Pre-mounted and pre-trued for most of today’s nitro on-road cars the tyres are available on white rims only.

View the other new tyres here

May 19, 2016

Serpent Cobra GT RaceRoller & RaceRoller Cup kits

Serpent have introduced three new kits based on their popular Cobra GT 1/8th GT. The pre-assembled kits allow to get on the track earlier and easier while accepting your choice of electronic and engines. All kits come factory-assembled and pre-set, they feature universal driveshafts, a 3-diff 4WD drivetrain, 16mm big bore shock absorbers, front and rear anti-roll bars and they build on 3mm heavy-duty aluminium chassis. Also included are clear bodyshells and pre-mounted high-grip tyre on BBS-style wheels. Available are the GT RaceRoller, the GT RaceRoller Cup Version for the Chinese Serpent GT Cup, including a Novarossi 3-port pull starter engine and also the GT-E RaceRoller for 1/8th electric motors. All three kits are available now.

View images of the race-ready chassis here