October 28, 2015

Kyosho MA-020VE Pro Mini-Z AWD chassis kit

Kyosho MA-020VE Pro Mini-Z AWD chassis kit

Coming soon from Kyosho is the MA-020VE Pro Mini-Z AWD kit. The all-wheel chassis features the VCS front suspension known from the MR-03 as well as a DWS rear double wishbone suspension for best possible handling. The 8500kV XSpeed VE brushless motor delivers a huge amount of power while being virtually maintenance-free at the same time. The chassis comes in the narrow track and M-size wheelbase configuration although parts for the wide track and L and LL wheelbase settings are included. Part of the package is also the MHS 2.4GHz system that, when used with the Synchro EX-6 transmitter, is up to 16-times faster than the ASF system and 4-times faster than the KO Propo EX-1 combo. Not included in the set are wheels, tyres and a bodyshell.

View the features and more photos here


October 27, 2015

Xray X1 2016 formula car kit – Coming soon

Xray X1 2016 formula car kit – Coming soon

Xray have released a first teaser for their forthcoming X1 2016 formula car kit. No details are available yet but expect photos, information and the kit itself to surface shortly.

Source: Xray [teamxray.com]


October 26, 2015

Yuki Model Amass T-type connectors

Yuki Model Amass T-type connectors

Yuki Model have introduced the Amass T-type connectors. Compatible with the iconic Deans plugs the connectors are of a new design with a rear cap that does away with the need to shrink-wrap the wires and solder posts, resulting in a cleaner looking and easier to handle connector. The cap features an inner partition wall that separates both poles so they will not short cut and the metal connector plates sport a high-quality gold-plating for reduced resistance and minimised burn-off for best possible durability.

Source: Yuki Model [yuki-model.de]


October 26, 2015

Steve Deblaere wins at Lovan RC Challenge Rd1

Steve Deblaere wins at Lovan RC Challenge Rd1

The opening round of the Belgium Lovan RC Challenge was held this past weekend in Kortemark. In the Formula class Steven Deblaere and Nicolas Delise battled for the pole position with the better end for Steve whose TQ time was only 0.18 seconds faster than Nicolas’. Dimitri de Baeker lined up in third for the finals. In the triple A-mains Steve would make a clean sweep to take the day’s win from Nicolas Delise who came in second but not without having another close fight with Steve in A1 when the two separated less than three tenth of a second. With two third place finishes Dimitri de Baeker would end the day on the third spot.

Source: Serpent [serpent.com]


October 22, 2015

Awesomatix A800 belt-driven touring car kit

Awesomatix A800 belt-driven touring car kit

Following a first teaser Awesomatix have released more information and images of their forthcoming A800 electric touring car kit. Looking at the renderings the new car sports several proven Awesomatix design features such as sheet material lower A-arms, rotary dampers and dual link-type upper arms but the A800 will utilise a belt drivetrain over the previous shaft drive design. The car is based on a newly design chassis with symmetrical cutouts and recessed areas for optimised flex characteristics while the centralised position of the belts greatly reduces the chance of the chassis to become tweaked under load. Additionally both the motor and battery sit nearly 4mm closer to the centre line compared to other cars on the market to allow for a very centralised weight distribution.

Continue reading here


October 22, 2015

Mibosport tire knife tool

Mibosport tire knife tool

Mibosport have introduced their tire knife tool for rubber on-road tyres. The razor-sharp fork helps to remove the performance-hampering moulding flash on touring car and formula rubber tires, thus doing away with the need to pre-scrub the tire before use in most cases. The knife is made from high-quality stainless steel and it comes etched with the Mibosport logo.

View another photo here


October 22, 2015

HPI Pro5 4 degree soft C-hub set

HPI Pro5 4 degree soft C-hub set

New from HPI Racing and made for the HB Pro5 touring car is a soft C-hub set. Coming as pairs and including kingpin bushings the steering knuckle carriers with four degree built-in castor are made from a softer composite material and they are designed to fine-tune the handling of the car in various track conditions.

Source: HPI Racing [hpiracing.com]


October 22, 2015

Xray Work.Shop Germany – Announcement

Xray Work.Shop Germany – Announcement

Xray have announced the Xray Work.Shop Germany for the Saturday the 7th of November at the TSV 1871 Augsburg club. Held by Xray factory team driver Marco Kaufmann in cooperation with RC Kleinkram the workshop will focus on individual setup held and driver coaching. Included in the entry fee of 19 Euros is an Xray T-shirt and more information can be found here and also on the hosting club’s Facebook page here.

Source: Xray [teamxray.com]