Red RC » P On Road

September 9, 2015

Tekin Redline Gen3 brushless motors

Available soon are Tekin’s all-new Redline Gen3 540-size electric brushless motors. The third generation Redlines are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor that also delivers smooth power across the whole RPM range. The Gen3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are ideal for 1/12th and touring car racing classes. The Gen3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.

View the features and another photo here

September 8, 2015

ARC R8.0E 1/8th electric on-road car

Coming soon from ARC is the R8.0E 1/8th scale electric on-road kit. The electrified version of the popular R8.0 nitro car shares more that 80 percent of the parts with its nitro sibling while offering a purpose-designed layout with the drivetrain located between the saddle pack batteries. The chassis allows to use either 2S or 3S hardcase LiPo battery packs which are located as close to the centreline as possible for an improved weight distribution and maximised agility. The layout provides an ultra-low centre of gravity, a 50/50 left-to-right and 48/52 front-to-rear balance. The result is minimised chassis roll to make for better handling and a more balanced driving feel. Tests have shown that dual 2S packs and a 2200kv motor will accelerate the car to speeds of up to 85km/h while dual 3S batteries will propel the R8.0E to speeds of up to 115km/h, exceeding most nitro cars.

Continue reading here

September 8, 2015

Serpent wide rear wing, diffusor & rear pod plate

Made for the Serpent F110 SF2 formula car is are a new wide rear wing, diffusor and an adjustable rear pod support plate. Starting with the wing, it is available in a black and a white version and while being wider than the standard part it also offers additional adjustments in order to fine-tune downforce and drag. Swinging over to the diffusor, the moulded composite part is available in black colour only and it can add a certain stability while offering protection for the rear pod and spur gear at the same time. The diffusor is moulded from high-quality composite material and it attaches to the rear pod plate. Last but not least is the adjustable rear pod carbon fibre plate for the F110 that allows to mount the rear wing in a standard and a high position while retaining the diffusor’s low position. The wing and diffusor fit Serpent’s F110 kit and also the cars of many other brands.

View more images here

September 8, 2015

GForce TS90+ sensored brushless speed controller

Japanese company GForce have introduced the TS90+ brushless speed controller. Rated at 90A content current the speedo is good for the use with motors down to 5.5T at 2S LiPo battery packs. The controller is usable with or without an additional fan unit, it measures 39x38x20mm and it offers 6V/3A BEC output as well as several turbo and timing functions which are accessible using an optional programming box or GForce’s WiFi Link. The ESC comes pre-wired with 14AWG silicone wires, a power capacitor and it will become available with a black or orange heatsink.

View the specifications here

September 8, 2015

Roche P12 aluminium option parts

Roche have new aluminium option parts for the P12 1/12th scale pan car available. First up are off-set rear axle ride height adapters. The original parts are of a 0/1.5mm design with the optional parts being of a 0.25/1.25mm setting which makes for in-between ride height settings. The CNC-machined adjusters come black anodised and laser-etched for easy identification. Also new is an aluminium lower pod plate for the P12 with the 7075-T6 part increasing rear traction and improve motor cooling. The plate comes black anodised for wear and it is a direct replacement for the kit’s carbon fibre part. Last but not least are 4-40 aluminium rear wheel screws with 2mm hex heads. The red anodised parts are doing away with the need to use imperial-size tools to install or remove the wheels.

View the other new parts here

September 5, 2015

Alex Hagberg & Olly Jefferies – Exclusive Interview

As previously announced, today we are publishing an exclusive interview with Xray’s Alexander Hagberg and Olly Jefferies ahead of the forthcoming release of Xray’s new X12 2016 Spec. This interview from the Slovakian manufacturer will shortly be followed by an exclusive write-up with more in-depth information on what racers can expect from Xray’s latest 1/12th pan car.

Read the full exclusive interview here

September 5, 2015

Arrowmax 2800mAh 2S super shorty LiPo battery

Arrowmax have further extended their line of LiPo battery packs with the introduction of the 7.4V 2800mAh super shorty pack. Sporting the size of a single saddle pack the item is much small and lighter than a conventional shorty battery, allowing for super-light vehicle setups. Made from low-capacity yet lightweight high-performance 55C/110C cells the pack is ideal for 2WD vehicles. The hardcase is equipped with through-type 4mm connector tubes and 2mm balancer ports.

View another image here

September 5, 2015

Radtec X1 aluminium option parts

Radtec have new aluminium option parts for the Xray X1 formula car available. First up are hard-coated aluminium turnbuckles. The 3-piece set includes the outer steering links and also the servo turnbuckle and it comes in a brown hard-anodised finish.

Continue reading here