Arrowmax have a new high-performance battery available in the form of the 7800mAh 2S LiPo pack. Built using high-capacity 55C/110C cells the battery comes in handy for all power hungry applications such as 1/10th touring cars as well as 1/8th E-buggies. The protective hardcase features standard 4mm bullet-type connector tubes which are accessible from both the top and bottom side and it is of standard 2S dimensions.
Click here to view another photo
Italian company Mon-Tech have a new battery mount for Xray’s X1 formula car available. The LiPo Stop does away with the need to use mounting tape to securely hold the battery in the car as the C-shaped aluminium hold down plate puts enough pressure on the battery to keep it in the chassis even when the going gets rough. The mount, that supports both a longitudinal and transversal battery position, attaches to the existing battery plate and included in the set comes the plate, one long and two short aluminium posts as well as mounting hardware.
Click here to view more photos
Available now from Reds Racing is a dedicated nitro engine range for 1/8th GT vehicles. Built using the same crankcase and crankshaft as Reds’ 1/8th R line engines, the new GT range features a class specific timing, and a 5-port liner and 7mm venturi insert to comply with the classes’ engine regulations. Available are two versions; the R5 Racer GT and R5T Team Edition GT. The Team Edition engine features a HCX horizontal carburettor, a silicon filled, balanced and tuned crankshaft, a RDC hard coating back plate, a sleeve with five inlet ports and exhaust port with booster as well as a high performance Japan-made front ball bearing and a Swiss-made ceramic rear bearing.
Click here to continue reading
Made for Tamiya’s Evo6 shaft-driven touring car is Exotek’s latest Evo-Six chassis conversion kit. Targeting stock and VTA racers the kit offers a new inline motor mount plate that eliminates one of the three Evo6 gearboxes for improved top speed, motor efficiency and reduced weight. The motor plate with a centrally mounted and triangulated base insures solid motor mounting and superb gear mesh while being independent of the top plate to reduce tweak and to provide better top plate flex traits. Furthermore the 2.25mm quasi weave chassis is stiffer than the stock chassis for improved handling in higher grip track conditions. With a left side motor position also torque steer is eliminated while a motor position further back helps with high-speed steering and low-speed stability. The included one piece, hard anodised spur mount/input shaft eliminates the play and vibration of the stock unit and a new LiPo cradle system with adjustable sliding holders allows to adjust the weight balance to your liking. The conversion is compatible with the Evo6 kit and also the TB04 v1 and v2 when combined with the new Exo-Six to TB04 parts pack.
Click here to continue reading
Coming from Serpent and made for the 411 Eryx touring car are anodised aluminium castor hubs for RRS equipped cars. Machined from high-quality material the hubs include delrin king pin inserts and they are made for the use with the reactive rear steering system but they are also good for the use in the front of the car.
Source: Serpent [serpent.com]
Following a recent teaser Fenix now have first images of their forthcoming Mistral 1/10th scale Formula pan car kit available. Designed to offer the lowest possible centre of gravity the vehicle builds on a high-quality 2.5mm quasi isotropic carbon fibre chassis that allows for three different battery positions; a longitudinal as well as a front or rear transversal one. When a low-profile shorty LiPo is used additional weights can be placed on the chassis to obtain the best possible weight balance. Up front a redesigned suspension allows for easy rigidity adjustment and independently adjustable camber and caster settings. The car will become available as a full kit, including genuine Tuning Haus alloy chassis posts, and also as an upgrade set for the already existing Suzuka kit.
Click here to view more photos
Shepherd have new upgrade parts for their Revolutionary shock absorbers available. First up is the shock revision set that will keep the dampers in perfect condition. New piston rod O-rings guarantee a smooth operation of the piston rod while the black O-rings ensure a precise guidance of the floating piston. With the included balljoints and shock caps slop can be reduced for a much more precise operation of the shocks. Also new are updated shock bottom caps that allow an easier escape of air bubbles when tightening them down. Thanks to a much larger bleeding slot a simpler and faster filling of the shocks is possible and the screws are also included in the Velox kits from now.
Click here to view the lower shock caps
KM have a new option part for the H-K1 Meen Version 200mm nitro touring car available in the form of small diameter belt tensioner bearings. The flanged ball races measure 5x10x4mm and they reduce the drivetrain’s resistance and improve smoothness especially when used in combination with the #HK387B centre drive belt.
Click here to view a photo of the bearings in place
