Red RC » P On Road

July 24, 2015

Hobbwing XeRun XR10 Justock & Justock 3650 motor

Hobbywing have introduced the new XeRun XR10 Justock brushless speed controller and Justock 3650 sensored brushless motor. Starting with the controller, the device was especially designed with zero timing/boost racing in mind. Featuring an aluminium upper case with built-in heatsink and making use of internal heat-conductive copper plates the controller stays cool even in high ambient temperatures and in demanding racing conditions. The small footprint allows the controller to be used in a range of classes including touring cars, 1/12th and formula cars and the single-button setup helps to fine-tune the software settings. As usual the controller’s firmware can be updated using the Hobbywing USB Link software and the LCD Program box.

Click here to continue reading

July 24, 2015

CRC 1/10th GTR wheels & RT1 rubber tyres

Calandra Racing Concepts have introduced new wheels and tyres for 1/10th on-road cars. Starting with the GTR wheels, these are designed for rubber tyre 1/10th scale pan car racing, both oval and road. They are direct bolt on for 1/10th cars and in the rear, they use the standard 4 bolt mounting pattern commonly used in oval and World GT. In the front, they utilise the normal 1/8×5/16″ bearing, again very common among the 1/10th oval and World GT cars. The mounted tyres measure around 2.45″/62.2mm diameter, most all pan cars can be adjusted to make the proposed 5mm ride height rule. The rims are designed to mount tyres such as the Pit Shimizu, Tamiya TCS and CRC RT1 and the rims allow for two types of scale looks; low profile sidewall GT type cars and large sidewall NASCAR and F1 scale looks. As for the new RT1 tyres, they mount in the same style as the most popular Formula tyres, the Pit Shimizu 0571 and 0572 and the Tamiya TCS. The CRC tyre is meant to perform very well with great grip and stability on both carpet and asphalt. Coming this Fall are also pre-mounted tyre and wheel combos.

Click here to view photos of the mounting variants

July 23, 2015

Xtreme Racing X1 wishbones & front wing support

Xtreme Racing have introduced a range of carbon fibre option parts for the Xray X1 formula car. Available are a standard 2.5mm carbon fibre front lower A-arm as well as a reinforced variant with additional support brace for added durability. Also coming is a 1.2mm front wing support for the original polycarbonate wing assembly. All parts are cut from high-quality fibre material and they are of a drop-fit design.

Click here to view another photo

July 23, 2015

Yeah Racing Sprint 2 Endurance upgrade set

Coming from Yeah Racing and made for the HPI Spring 2 is the Endurance upgrade set. The package includes a range of aluminium parts such as front and rear bulkheads, shock towers, layshaft bearing hubs and more to improve the durability and precision, which is crucial when running low turn brushless motors and LiPo batteries. The shock towers also allow for a wider setup window while the bulkheads incorporate lower suspension mounting points for added rigidity. Also included are alloy battery mounting posts and an adjustable belt tensioner. The set is available for pre-order now and expected to ship at the end of July.

Source: Yeah Racing [yeahracing.com]

July 23, 2015

Xray NT1’15 graphite aerodynamic wheel discs

Xray NT1'15 graphite aerodynamic wheel discs

Xray have introduced two sets of aerodynamic wheel discs for the NT1’15 200mm touring car. Machined from 1.6mm high quality carbon fibre material the parts are a direct fit on the front steering knuckles and rear hubs and they are meant to improve traction, stability and steering on high-speed tracks. The discs are available as separate front and rear sets and come including mounting hardware.

Click here to view the rear set

July 22, 2015

Castle Creations Mamba Micro X brushless ESC

Castle Creation soon have the new Mamba Micro X brushless speed controller available. The waterproof speedo is suitable for 2WD or 4WD vehicles such as the Mini-LST, Half-Eight, Mini-Quake and Spyder vehicles. The controller received a heavy-duty BEC to handle today’s high-draw digital servos and also features a programmable auxiliary wire that allows the user to make “on-the-go” adjustments to several settings, such as torque control and max throttle, directly from a compatible transmitter. This allows to fine-tune the performance of the Micro X to meet changing driving conditions. New to the Micro X is the ability to run sensored brushless motors with the purchase of an optional sensor harness. The Micro X is cable of running on 2S up to 3S LiPo power with a highly-efficient heat sink design to keep the controller running cool, even when pushing it hard in mud, sand and other heavy power applications. The ESC is available as controller only or as controller plus motor combo.

Click here to view the specifications and another photo

July 22, 2015

Yokomo BD7 double joint universal driveshafts

Made for the BD7 touring car are new double joint universal driveshafts from Yokomo. Offering improved durability and reducing unwanted wheel chatter at high steering angles the driveshafts are made from high-quality steel and they come including a pair or ball bearings.

Source: Yokomo [teamyokomo.com]

July 22, 2015

Radtec 2.01mm & 3.01mm arm reamers

Radtec have introduced two new arm reamer tools for the use with a range of vehicles. Made from high-quality steel material and coming titanium-coated for durability the tools are made to slightly widen the suspension pin holes of lower A-arms in order to make for binding-free operation. The tools are available in a 2.01mm and 3.01mm variant and they sport lightweight CNC-machined aluminium handles with a diamond pattern surface for convenient usage.

Source: Radtec [radtec-rc.com]