Red RC » P On Road

June 4, 2015

Protoform Cadillac ATS-V.R 190mm bodyshell

Protoform Cadillac ATX-V.R 190mm bodyshell

New from Protoform comes the Cadillac ATS-V.R 190mm touring car bodyshell. The full-scale counterpart is the third generation of V-Series race cars and built to international FIA GT3 specifications with the Protoform body being officially licensed, offering ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. The 2-door coupe race body is formed from genuine .030″ Lexan and it includes injection-molded wing struts to support a unique rear wing design. The wing features two different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the body suitable to any kind of GT-class rules.

Click here to view more photos

June 4, 2015

Tamiya Nissan GT-R LM Nismo & TT-02S Type-S

Coming soon from Tamiya are the Nissan GT-R LM Nismo and the TT-02D Type-S kits. Starting with the Nissan, the full-scale car is the company’s LMP1 contender for this year’s 24 Hours of Le Mans race and a pretty special machine as the GT-R LM Nismo is a front motor/front driven vehicle. Tamiya’s 1/10th scale kit unfortunately does not mimic this setup but uses a pretty standard F103GT rear wheel drive pan car chassis with rubber tyres. The included Nissan bodyshell is a multi-piece affair with separate rear fin and rear wing as well as a comprehensive decal sheet.

Click here to continue reading

June 3, 2015

Team Associated Factory Team Compact Starter Box

Team Associated Factory Team Compact Starter Box-1

Team Associated have introduced their Factory Team Compact Starter Box for 1/8th and 1/10th scale nitro vehicles. Featuring a single heavy-duty 775-size motor and being useable with two 6-cell NiMH or 2S LiPo packs the starter box is powerful enough to even bring factory-new engines to life. The case features a built-in handle and the top surface is customisable using the supplied Factory Team decal. The package is rounded out by wiring and alligator clips for hooking up the box to an optional external 12V power source.

Click here to view the features and more photos

June 3, 2015

Yokomo Drift Package RWD conversion kits

From Yokomo and made for the Drift Package range of on-road vehicles come the RWD conversion kits. Available in an aluminium and an aluminium/plastic version the sets will increase the counter steering angle and allow for a wide range of steering Ackermann adjustments. The aluminium version also provides a wider selection of upper arm pivot points for increased control over the front tyre angles. Included in both sets are a front shock tower, front upper arms, front upper arm supports, with these parts coming as aluminium or plastic items depending on the selected set while the included aluminium lower arms, alloy steering knuckles and long steering bellcranks come as alloy parts in both sets.

Click here to view the other new conversion kit

June 3, 2015

Brilliant RC 200cc nitro fuel gun

New from Brilliant RC comes a handy fuel gun made from high-quality materials. Thanks to the short front body and the ergonomic design of the handle the gun allows for easy and swift refuelling while minimising the chances of errors during pitting at the same time. The optimised, extra short nozzle with integrated auto-stop ensures a maximum filling of the tank and an extra large intake makes it very easy to fill the 200cc reservoir of the gun which also features easy to read volume markings down the side. The cap is attached to the body by a chain so it cannot get lost and the cap and all other necessary areas the fuel gun are sealed using high quality O-rings to prevent the gun from leaking. Included are two suitable stays to place the gun when not in use.

Click here to view more photos

June 3, 2015

Samix BD7-2015 aluminium chassis

Coming from Samix and made for the Yokomo BD7-2015 is an aluminium chassis set. Cut from high-quality 7075-T6 material and with a black anodised the chassis is only 82mm wide for improved ground clearance during heavy cornering while the dark anodising with silver chamfered edges makes for a quality appearance. Included is also a suitable 30mm fan mount with wire routing channel. As with the majority of aluminium chassis this one is best used on high traction asphalt or carpet tracks.

Source: Samix [rcsamix.com]

June 3, 2015

Team C 30mm ESC heatsink fan mount

Following the 25mm ESC heatsink fan mount Team C now also have a version available for speed controllers with a 30mm fan mounting pattern. Designed mainly for touring car applications and made from black or orange anodised aluminium the fan mount attaches to the speed controller’s heatsink in order to place the included 30mm WTF fan unit at an angle. This setup can improve the cooling of the speed controller while also blowing towards the motor, allowing to spare the additional motor fan for less amp draw and reduced weight.

Click here to view another photo

June 1, 2015

ProTek Premier Blue O-ring & multi-purpose grease

ProTek R/C’s new Premier Blue O-ring grease and multi-purpose lubricant is a special grease that provides exceptional sealing, lubrication and stiction-free performance for suspension parts, bearings, bushings, pivots, as well as any other linear movement applications. It features a specially-formulated mixture of additives that won’t cause seals or O-rings to swell or deform as it impregnates the pores of the surface, while providing sticking power for prolonged performance. Available in a 10ml syringe or as 4-ounce jar the lube’s special formulation provides a layer of protection that also protects against corrosion and oxidation and additionally it also provides a waterproof layer for long-lasting smooth performance when things get wet.

Click here to view the 4-ounce jar