Red RC » P On Road

January 20, 2015

HPI Racing Q32 option parts & USB charge wire

For HPI Racing’s Q32 2WD micro buggy come a range of option parts such as a high speed gear and stability set, optional rims and tyres as well as an USB charge cable. Starting with the high speed gears and stability set, the kit contains three different gearing sets for acceleration and top speed adjustment, as well as a steering toe set to increase the front toe out angle by 1 or 2 degrees. Also part of the package is a tweak screw set to adjust the turning radius to be wider or sharper.

Click here to continue reading

January 20, 2015

Yokomo Racing Performer B series LiPo batteries

New from Yokomo come the Racing Performer B series LiPo competition battery packs. A special inner cell structure of the 100C packs boosts the performance, making the batteries ideal for both Stock and Modified classes. The B series 7.4V batteries are available as a 5800mAh standard, 4800mAh shorty and 3500mAh low-profile variant with the with the standard and standard height shorty pack offering a unique 5mm and 4mm connector tube configuration to offer reverse polarity protection. As a bonus the first batch of the batteries will include suitable bullet-type connectors.

Click here to view more photos

January 20, 2015

Xray T4 titanium suspension pivot pins

Made for the T4 line of touring cars are new titanium pivot pins from Xray. Hand-ground for the highest possible precision the parts not only scrub some weight compared to the standard steel pins, they also offer a high durability. The shaft are available as inner suspension pivot pins as well as front and rear outer arm pins and they come in sets of two.

Click here to view the other new parts

January 20, 2015

JConcepts Advanced Formulated Tire Glue

New from JConcepts comes the Advanced Formulated Tire Glue, a low viscosity cement specially formulated to allow for maximum bonding. The CA glue is deal for virtually every tyre glueing job and it comes in a sealed package that contains glue, gluing tip applicator and plugging needle.

Source: JConcepts [jconcepts.net]

January 19, 2015

MD Racing MDF14 1/10th formula kit

MD Racing introduce the MDF14 1/10th formula kit that has been developed over the past 10 month by Vicente Moreno Machancoses with the support of Toni Alama, Vicente Eres, Hector Albarracín, Jose Argonne, Sasha Klung, Daniel Raimann and Gabor Forray. The pan car features a ball motion called front end design that allows for active camber adjustments to fine-tune steering characteristics in corners. Another parameter to set-up up front is the roll centre, again to adapt the car to various track conditions. Other features include a variable servo system to alter the weight distribution without disturbing Ackermann setting and the car is based on a chassis that can be run with shorty or standard length battery packs with the shorty batteries being placeable in an inline or longitudinal position.

Click here to continue reading

January 19, 2015

Zeppin Racing Super Crazy high-speed fan

Zeppin Racing introduce their new Super Crazy high speed fan that features an open board with solder tabs for easy connection wire changes. The fan unit sports dimensions of 40x40x10mm and the easily accessible solder tabs allow for simple wire length adjustment and clean wiring jobs. The dual ball raced super high speed fan comes including a 170mm black universal wire.

Click here to view more images

January 19, 2015

Tamiya TT-02 R33 Drift Spec & Raybrig NSX

Coming soon from Tamiya are two new 1/10th scale kits based on the TT-02 entry-level 4WD touring car chassis. First up is the Nissan Skyline R33 on the Drift Spec TT-02D chassis, a kit that offers some optional parts such as ball bearings, a sport-tuned motor and aluminium heat sink. Included in the kit comes a highly detailed 1995 Skyline R33 body and mesh-type wheels with Super Driftech tyres.

Click here to continue reading

January 16, 2015

Xray RX8 XCA hard-coated aluminium pinions

Xray introduce hard-coated aluminium pinion gears for RX8’s with XCA clutchbell. Cut from tough 7075-T6 aluminium and coming with a hard-coated surface for strength and durability the gears help to fine-tune the gearing of Xray’s 1/8th nitro on-road car. Made on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. A fine internal threading allows for easy installation on standard or lightweight XCA clutchbells and each of the pinions, that are available as 17T to 19T 1st and 22T to 25T 2nd gear variant, comes etched with the tooth number for quick and easy identification.

Source: Xray [teamxray.com]