Red RC » P On Road

January 14, 2015

Yeah Racing Sprint 2 aluminium suspension kit

Coming from Yeah Racing and made for HPI’s Sprint 2 touring car kit is the aluminium essential conversion kit. The set includes a range of machined aluminium parts such as front and rear lower A-arms, steering knuckles and C-hubs, rear hubs as well as steering servo saver and bellcrank parts, all made to replace the standard plastic items with stronger and cooler looking components. The A-arms, C-hubs and rear hubs also feature composite inserts to make them operate smoothly and without excessive play on the suspension shafts. Included with the purple anodised alloy parts are also front and rear CV-style driveshafts and a small hardware set.

Source: Yeah Racing [yeahracing.com]

January 13, 2015

Hiro Seiko lightweight screw kits for Xray X1

Hiro Seiko have introduced two new new lightweight screw kits for the Xray X1. Coming as an all-titanium or mixed aluminium and titanium set, both are made to significantly reduce the weight of the car with the titanium set scrubbing around 11.8g of weight while the mixed set saves around 15.6g.

Source: Hiro Seiko [hiro-seiko.com]

January 13, 2015

Sweep silver & bronze 1/10th wheels

Sweep silver & bronze F1 & mini wheels

If you like shiny things and you drive in the Formula or Mini class then Sweep has you covered. Introducing a range of silver and bronze coated wheels for the Formula and mini classes. The same dimensions and features as their non shiny versions only just with a bit more bling.

View the mini wheels here

January 12, 2015

Xray X12 orange eccentric aluminium bushings

From Xray and made for the X12 and X10 pan cars are orange anodised eccentric aluminium bushings. Coming as pairs and in 0.5mm and 1.0mm configuration the parts are designed to fine-tune the front end track width and they complement the standard 0mm parts.

Source: Xray [teamxray.com]

January 12, 2015

BMT 984 clutch housing, swaybars & servosaver axle

New from BMT and made for the 984 on-road car are several option parts to enhance the performance and durability. First up is an aluminium clutch housing with a special hard-coat surface to make for less wear and improved durability. Also new is a hardened steel servo saver axle, again made to improve reliability and durability. Last but not least are two new rear anti-roll bar wires in 2.6mm and 2.8mm diameter that help to fine-tune the roll characteristics of the car.

Source: BMT [bmt-team.com]

January 12, 2015

Radtec BD7 -1mm hard-coated pivot balls

From Radtec for the Yokomo BD7 comes a set of low-profile pivot balls that sport a reduced height to allow for more traction in corners when used as camber link ball studs. 1mm lower in height than the original Yokomo ZC-206SH parts the 4.3x10mm balls come made for hex head wrenches and they sport a hard-coated surface for super-smooth suspension operation.

Click here to view the stock and optional ball side by side

January 12, 2015

New VBC Racing D07 option parts

VBC Racing have a range of new option parts for the Wildfire D07 touring car available such as a chassis mounted steering post set, a steering rack stiffener post, a 2-point suspension mount shim set as well as front and rear stabiliser sets. Starting with the steering post set, the parts allow to convert the “floating” steering assembly into a conventional, chassis mounted steering in order to adapt the cornering characteristics to your liking. Included is a pair of bellcrank posts and countersunk screws.

Click here to continue reading

January 12, 2015

Teamsaxo late 1980’s style formula bodyshell

Teamsaxo late 1980's style formula bodyshell

New from Teamsaxo comes the TS01097 formula bodyshell. Its design resembles a late 1980’s, early 1990’s formula 1 car and it is best used on medium to high speed tracks. The body is made from clear polycarbonate and made to fit most of today’s formula chassis.

Source: Teamsaxo [saxoracing.com]