Red RC » P On Road

January 30, 2015

Exotek DEX210 motor plate & DETC410 diff cams

New from Exotek come two aluminium option parts for the Team Durango DEX410 and DETC410 kits. First up is the Flite vented motor plate for Team Durango’s 2WD buggy. The 100 percent CNC-machined vented motor plate keeps the motor running cooler and longer for that extra edge. Aggressive cut-outs allow the heat that builds up inside the gear cover to vent out thus lowering overall motor temps greatly. The extra machining reduces the weight down to 16g, making the plate over 5g lighter than stock, but the critical motor mounting areas are still intact to maintain solid motor mounting and gear mesh. The plate is available in gold or black anodising and it easily mounts as MM3 or MM4 configuration with the Exotek logos laser etched on both sides of the plate.

Click here to continue reading

January 30, 2015

New LRP LCG, Stock Spec & CCL LiPo batteries

LRP have a range of new high-performance LiPo battery packs available in the form of the LCG and Stock Spec line. Starting with the LCG packs, the acronym stands for Low Centre (of) Gravity and the packs are of a reduced height to lower the overall centre of gravity of the chassis while offering a lower weight at the same time. The LCG packs are available as 5600mAh 110/55C TC standard length, 3700mAh 110/55C saddle and 2900mAh 110/55C shorty pack.

Click here to continue reading

January 30, 2015

PowerHD BLS-1205HV low profile brushless servo

PowerHD introduce the BLS-1205HV low profile brushless servo for 1/10th GP on-road and EP off-road applications. Offering up to 12kg-cm of torque and a transit time of 0.055s the high voltage compatible brushless servo features dual ball bearings, titanium and steel gears and a middle heatsink case.

Click here to view the features and another photo

January 29, 2015

Tamiya TB Evo.6 Black Version chassis kit

Tamiya’s TB Evo.6 4WD shaft driven touring car kit will soon also become available in a limited edition Black Version. It is understood that the car, that features a pretty unique layout with a shaft drivetrain but a transversally mounted motor – as seen on belt-driven cars – is unchanged from the standard “blue” version apart from the black aluminium parts for the bulkheads, turnbuckles and damper parts.

Source: Tamiya [tamiya.com]

January 29, 2015

Capricorn Lab C03 hard chassis & new engine mount

Capricorn have two new option parts for the Lab C03 200mm nitro car available in the form of a hard main chassis plate and a monoblock engine mount. Starting with the chassis, the part is designed to be an option for the standard flex chassis that comes with the car kit. The hard chassis is meant to give less flex which allows to fine-tune the car to different track conditions. Also new is the monoblock engine mount that stiffens the rear part of the chassis under the engine mount area. The single piece part is of a heatsink design to assist with heat dissipation from the engine’s crankcase.

Click here to view the engine mount

January 29, 2015

Spec-R T4’15 motor mount conversion kit

Spec-R T4'15 motor mount conversion kit

New from Spec-R comes a motor mount conversion kit for Xray’s T4’15 touring car. Included is a redesigned motor and layshaft mount made from orange anodised 7075 aluminium that utilises a single mounting bracket for the layshaft for improved flex characteristics. The rear part of the motor mount offers two different ARS toe link positions, doing away with the standard towers, and included are also hard-coated 7075 aluminium centre belt pulleys, a spur gear and a front topdeck mount.

Click here to view another photo

January 29, 2015

Blaze Racing Yokomo R12 rear pod conversion

Blaze Racing introduce a rear pod conversion kit for the Yokomo R12 1/12th scale pan car that allows to run CRC’s slider rear end to combine the best of both worlds. The set includes three new carbon fibre parts cut from 2.5mm material; the lower plate, the upper plate and the rear brace. The conversion allows to run oil side dampers while retaining the standard Yokomo geometry and it comes without the needed CRC alloy parts.

Click here to view more photos

January 28, 2015

Tamiya TT-02R electric touring car kit

Tamiya introduce the TT-02R electric touring car kit featuring some valuable optional parts such as a aluminium main shaft parts, aluminium steering turnbuckles, lock nuts and ball joints as well as new grey colour CVA shock absorbers and black springs. Also included will be 3 degree toe-in rear uprights, a blue aluminium motor mount, a ball bearing set and more.

Source: Tamiya [tamiya.com]