December 3, 2014

ProTek R/C Electronic Switch

ProTek R/C Electronic Switch

The ProTek R/C Electronic Switch is of a completely sealed low-profile design so it can be mounted anywhere without fear of dirt and grime working its way in and causing a failure. Built-in voltage cutoff for LiPo receiver packs prevents the battery from becoming deep discharged while a LED on/off indicator gives feedback on the remaining battery capacity. Three mounting lashes allow for easy installation of the switch using the chassis’ personal transponder mount.

Click here to view the features


December 2, 2014

Xray X1 Formula kit – Exclusive story coming soon

Xray X1 formula kit – Exclusive story coming soon

With the official introduction of the brand-new Xray X1 1/10th Formula kit only days away, this week Red RC will bring you an exclusive insight into the company’s first ever open wheel on-road car followed by the full official release. Stay tuned.


December 2, 2014

Yokomo YRF 001W rear friction tube damper spec kit

Yokomo YRF 001W rear friction tube damper spec kit

The Yokomo YRF Formula 001W competition formula chassis kit has been updated with the new rear friction tube damper system which is based on the same system that has been tried and battle-tested on the R12C3.1 1/12th scale kit. By outfitting the 001W with this type of suspension system the overall weight is reduced and the side-to-side balance has improved, allowing better control and sharper turn manoeuvres. The kit comes with two types of front suspension arms to support both foam and rubber tyres with the wide specification suspension arms are used with foam tyres to achieve higher corner speeds, while the narrow specification suspension arms are used with rubber tyres to make for a more scale appearance.

Click here to view the specifications and more photos


December 2, 2014

Zeppin Digital Tweaker Scale Elite

Zeppin Digital Tweaker Scale Elite

Zeppin introduce their new Digital Tweaker Scale Elite weight measurement system. The patent pending height-adjustable design of the scales ensures an equal height of every platform which makes wheel load measurement as accurate as possible. They system includes four individually powered scales with hardened glass platforms for best possible rigidity against scratches, and rubber feet prevent the scales from moving on the pit table. The main unit sports an easy-to-read black and white LCD screen that helps with visibility even in bright sunshine. The heavy duty yet precise design of the scales allows to measure the individual wheel load of lightweight 1/12th scale to heavy 1/8th trucks alike. Included in the tweak system are four tweaker scales, the main unit and a height measurement tool.

Click here to view the features and another photo


December 2, 2014

Xray T4 medium & hard graphite composite C-hubs

Xray T4 medium & hard graphite composite C-hubs

Xray have new composite C-hubs for the T4 line of touring cars available. They add to the already existing range of castor hubs and help to fine-tune the steering response as they are available in different castor and material combinations. New to the range are 0 degree medium and hard graphite as well as 4 degree hard graphite hubs all of which are usable with Xray’s dual joint ESC driveshafts. The 0 degree variants also work with the ARS rear suspension system. All hubs are available separately for the left and right side of the car and they are clearly marked for easy identification.

Click here to view the graphite C-hubs


December 1, 2014

Xray X1 1/10th formula kit – Coming soon

Xray X1 1/10th formula kit - Coming soon

It is no secret that Xray is working on a 1/10th formula chassis for some time and now things seem to materialise as the Slovakian company has released a first teaser image of the X1 kit. No information are available yet but we expect more information and images to surface soon.

Source: Xray [teamxray.com]


December 1, 2014

SkyRC Motor Analyser brushless motor tester

SkyRC Motor Analyser brushless motor tester

New from SkyRC comes the Motor Analyser, a device to test and fine-tune electric brushless motors. The motor tester offers KV measurement, voltage, RPM and Amp draw tests as well as timing and hall sensor checks together with a noise level test that allows to draw conclusions on the conditions of the ball bearings. Coming in a sturdy aluminium case the device sports a back-lit display, jog dial menu operation and it includes an array of wires such as a sensor cable, motor connection wires and power input adapters.

Click here to view the specifications


December 1, 2014

VBC Racing Lightning12 V2 1/12th scale kit

VBC Racing Lightning12 V2 1/12th scale kit

VBC Racing introduce the Lightning12 V2 1/12th scale pan car kit. It is based on the race-proven Lightning12 and it features updated V2 composite material front suspension parts for optimised fitting, reduced slop and improved handling. An aluminium shock mount with integrated roll-over antenna mount is now also part of the package as are aluminium body height adjusters. Other new features include titanium-nitride coated kingpins, arm pins and also the shock shaft received the friction and wear reducing Ti-Ni treatment. Otherwise the V2 version remains unchanged in terms of features and specifications with a 2.5mm carbon fibre main chassis, with off-set battery placement, front aluminium suspension mounts, a dual roll damper setup and a large volume centre shock.

Click here to view the features and more photos