September 11, 2014

H-Speed Smoothies 1/10th scale shock O-rings

H-Speed Smoothies 1/10th scale shock O-rings

H-Speed introduce the Smoothies shock absorber O-rings for a range of 1/10th scale on-road and off-road vehicles such as the ones from Team Associated, Losi, Team C, Tamiya, Xray and Yokomo. The white colour O-rings offer the smoothest possible shock action without the often feared swelling or leaking for consistent damping characteristics over a long period of time. The O-rings come in packs of 8 and they are available now.

Source: H-Speed [h-speed.at]


September 10, 2014

Sonic EFRA #2678 .12 exhaust pipe

Sonic EFRA #2678 .12 exhaust pipe

Sonic introduce the new EFRA #2678 exhaust pipe for .12 nitro on-road engines. Developed in cooperation with various top-drivers and successfully used by Patrick Schäfer at the Euros A and German championships, the latest Sonic pipe lowers the fuel-consumption for increased runtime while keeping a good balance of bottom end power and maximum RPM. The pipe is EFRA legal and available from now as pipe only or as a complete set including manifold, springs and silicon gasket.

Source: Sonic Engines [sonic-engines.com]


September 10, 2014

WRC F-One ‘014 lower rear pod plate

WRC F-One '014 lower rear pod plate

Italian company WRC Racing introduce a new lower rear pod plate for their F-One ‘014 1/10th formula 1 car kit. Cut from 2.3mm carbon fibre redesigned plate offers improved rigidity to better withstand the rigours of racing.

Source: WRC Racing [wrc-racing.com]


September 10, 2014

HPI Micro RS4 Drift Nissan S13 RTR

HPI Micro RS4 Drift Nissan S13 RTR

HPI Racing soon have a new bodyshell variant for the iconic Micro RS4 1/18th scale chassis available. The Discount Tire/Falken Tire Nissan S13 replicates Dai Yoshihara’s tarmac eating drift machine and the belt-driven 4WD chassis is equipped with solid front and rear axles as well as hard plastic drift tyres. A full set of ball bearings reduced drivetrain losses to a minimum. The car is powered by an HPI 180-size motor, an electronic speed control, and controlled by a waterproof steering servo. A 2.4GHz radio system, wall charger and batteries round out the package.

Click here to view the features and another photo


September 9, 2014

ZZRacing Xray series lightweight parts

ZZRacing Xray series lightweight parts

ZZRacing have new lightweight hardware sets available for a range of Xray kits such as the XB4, T4’14, NT1’14 as well as the X10’15 and X12’15. The sets contain titanium and stainless steel screws, anodised aluminium lock nuts and countersunk washers to scrub around 50 percent of weight on the hardware. The aluminium parts come orange anodised to match Xray’s colour theme and the sets are available now.

Source: ZZRacing [zzracing.net]


September 8, 2014

Capricorn LAB C03 1/10th scale 200mm chassis

Capricorn LAB C03 1/10th scale 200mm chassis

Following the introduction of their latest 1/8th scale chassis Italian company Capricorn now also have first information on their forthcoming new 1/10th scale 200mm car available. The LAB C03 is an evolution of its predecessor, the C02, with the transmission has seen a bit of a make-over to become easier to work on. Several redesigned areas reduce the overall number of parts for improved reliability and reduced maintenance time. Also new on the drivetrain are redesigned tensioners for all three belts and the ability to run high or low front and rear axles. A redesigned chassis makes for improved weight distribution and constant flex control for more steering and traction. Another new chassis part is the completely redesigned radio plate which uses a traditional position for the throttle servo and a floating, ball-raced front mount for the FSS front flex system. Other new features include new shocks, a redesigned engine mount and alternative link position for the rear upper links providing better traction in low grip conditions.

Click here to view more photos


September 8, 2014

Stoff RC 4500mAh 80C LiPo shorty battery

Stoff RC 4500mAh 80C LiPo shorty battery

Ruddog now have the Stoff RC 4500mAh 80C LiPo shorty battery pack available. The economically priced battery is built from high performance 80C cells and ideal for a wide range of applications. The hardcase pack comes equipped with 4mm tube-type connectors and a 2mm balancing port.

Source: Ruddog [ruddog.eu]


September 8, 2014

Xray RX8 rear anti-roll bar wires

Xray RX8 rear anti-roll bar wires

Following last week’s release of optional front anti-roll bars, Xray now also have new rear swaybars for the RX8 available. Coming as thinner 2.6mm and thicker 3.0mm variant, the two new anti-roll bars complement the standard 2.8mm part to allow for increased tuning capabilities. The wires come manufactured from a special spring steel material, they are black in colour and sport laser-etched size markings.

Source: Xray [teamxray.com]