Red RC » P On Road

July 21, 2014

SpeedMerchant RoadKill 10 235mm pan car

Available soon from SpeedMerchant is the RoadKill 10 235mm pan car kit. The car underwent a slight redesign after its initial introduction some weeks ago and it will now come with slightly narrower power pod to allow the use of Jaco tyres as well as the wider and very poplar BSR wheels. The kit is based on a wide carbon fibre chassis that allows to use standard as well as shorty and square LiPo battery packs. Up front the kit features a new-style suspension assembly with a simplified upper A-arm arrangement while in the rear a tried and tested link-type suspension comes to the fore. Dual roll dampers and a lightweight centre shock complete the suspension setup. The first batch of the RoadKill 10 kits will come without a rear axle but all standard 235mm axles should fit as do the famous IRS axles that are now being made by R.C. Hobbies/Hyperdrive/MSA. From the second batch on the kits will include the IRS2135 235mm axle.

Click here to view more photos

July 21, 2014

Active Hobby Products scale wheel nuts

Active Hobby Products from Japan soon have scale 5-bolt wheel nuts for 1/10th drift cars available. Machined from aluminium and sporting a realistic 5-bolt design, the wheel nuts offer a serrated section for a secure fitment without the usual nyloc insert. The nuts are available in several variants with dark blue, light blue, red, gun metal, pink and purple highlighted bolts. Fastening the nuts requires a special driver that will become available on time with the wheel nuts.

Click here to view a photo of the wheel nut in place

July 20, 2014

Radtec RC aluminium body height adjusters

Radtec RC aluminium body height adjusters-1

The Radtec RC aluminium body height adjusters are made from high quality aluminium material and they are available in a range of colours including a light “Tamiya” blue, a darker “Yokomo” blue, general black and also red anodising. Coming as pairs, the sets include two threaded aluminium tubes that slide over the chassis’ body posts and that are secured using pins or body clips while O-ring equipped knurled nuts allows for infinite body height adjustments. Laser-etched markings on the nuts help with precise adjustment.

Click here to view the colour variants

July 18, 2014

KM H-K1 Alu clutch bell & black shoe

New for the H-K1, KM Racing have released a new aluminium clutch bell and black clutch shoe. The aluminium clutch bell is lighter than the standard steel version and when combined with the new black material clutch shoe will give your car more punch in the bottom end. The black shoe must only be used with the aluminium bell.

View the new clutch shoe here

July 17, 2014

Xray X10 & X12 aluminium eccentric inserts

Made for Xray’s latest X10’15 and X12’14/15 cars are these eccentric aluminium inserts for the front lower A-arms. Available as standard, +/-0.5mm and +/-1.0mm variant, the bushings come in pairs and allow to increase or decrease the front track width in order to fine tune the handling of the chassis while adding a bit of durability at the same time.

Source: Xray [teamxray.com]

July 17, 2014

Sweep STC-6 touring car bodyshell – Teaser

Following the STC-4 190mm touring car bodyshell Sweep will soon have another TC body available. The teaser image of the forthcoming STC-6 shows a different hood design with two additional ridges that span from the grille section toward the wind screen. The grille itself also is of a slightly different design while additional ridged above the lower louvers give a hint on an updated aero package compared to the STC-4. We bring you more information about the body as soon as we get them.

Source: Sweep [sweepracing.com]

July 16, 2014

Avid 10th wing mount buttons

Avid introduce these black colour wing mount buttons for 1/10th on-road and off-road vehicles. They were designed after Avid’s successful 8th off-road wing button, they feature a countersunk screw hole and the same contact surface as the 8th buttons for an improved fitment of the wing and less deformation, resulting in increased rear traction at high speeds. The buttons come as pair, they are CNC-machined from aluminium and laser-etched with the Avid “A” and are usable on most touring cars and off-road vehicles that use M3 screws to fasten the wing.

Source: Avid [avidrc.com]

July 15, 2014

New titanium & aluminium screw kits from Hiro Seiko

Hiro Seiko introduce new lightweight screw kits for some of the latest car kits around. Coming as all-titanium or mixed titanium and aluminium sets, the screw kits significantly reduce the weight of the car – between 17g and 33g, depending on the vehicle they are used on – while adding a cool look at the same time. The latest additions are titanium kits for the Yokomo B-Max2 in MM and MR configuration, the Team Associated B5M, the Xray RX8’14 and NT1’14 as well as the Tamiya TB Evo.6. For the Evo.6 Hiro Seiko also have a mixed set with titanium and blue anodised aluminium fasteners available. All sets make use of high quality hex head hardware.

Source: Hiro Seiko [hiro-seiko.com]