August 20, 2014

Team Shepherd titanium screw sets

Team Shepherd titanium screw sets

Team Shepherd have released new titanium screw sets for the Velox V10 “PRO” and the Velox V8 “EC”. These premium titanium screws are machined from the highest grade raw material and compared to the standard screws, these titanium versions are about 45% lighter and lower the overall weight significantly. They are available in 3×6, 3×8, 3×10, 3×12, 4×8 and 4×10mm countersunk versions and 3×6, 3×8, 3×10 and 3×12mm button head versions and as complete sets.

Source: Shepherd [team-shepherd.com]


August 19, 2014

Xray X12 2015 1/12th chassis

Xray X12 2015 1/12th chassis

Xray have announced that they will release the 2015 version of their European Championship winning X12 1/12th scale chassis in the near future. Just in time for the IFMAR Worlds to be held in Florida in less than 3 months we have no information as of yet but we are pretty sure it will be more of a minor update rather than anything too major.

Source: Xray [teamxray.com]


August 19, 2014

Serpent Cobra GT zero degree castor blocks

Serpent Cobra GT zero degree castor blocks

Serpent have released new zero degree castor blocks for the 1/8 Cobra GT-e and GT GP. CNC machined from 7075 T6 aluminium, they are black anodized and laser engraved and supplied with all necessary hardware. The zero degree caster blocks will create more initial steering into the corner and it will hold its line even better.

Source: Serpent [serpent.com]


August 19, 2014

Team Tamale T4 chassis & 12th tire truing adaptors

Team Tamale T4 chassis & 12th tire truing adaptors

Team Tamale have introduced a new Xray T4 chassis made from 7075 T6 as well as 1/12th and 1/10th pan car tire truing adapters for foam tires. This chassis incorporates a few features not found on other T4 aluminium chassis. First, the battery compartment and the electronics side have been milled down. These cutouts will bring the chassis thickness down to 1.5mm. This allows the battery, speed control, receiver and servo to sit lower on the chassis as well as increase the flex through the middle of the chassis for different handling characteristics. You do not have to put the servo on the chassis, but you can used the floating mount. The motor recess have also been made 2mm narrower while limiting bending in this area. To limit the chassis rub in corners they also narrowed this chassis 2mm on each side and added a taper down each side. This will also help with the edge of the chassis catching on the race surface. Finally they have also added a taper at the front and rear areas around the droop screw areas of the chassis to try and limit the extra rub that can be seen with soft springs in high traction.

View details on the truing adaptor here


August 18, 2014

Yokomo Drift Package DIB ver.2 premium kit

Yokomo Drift Package DIB ver.2 premium kit

Yokomo have introduced this limited-edition Drift Package DIB ver.2 Premium Kit, a high-end version of the popular DIB series which sports aluminium A-arms and full aluminium bulkheads. The aluminium A-arms, popular amongst expert drifters, consists of a highly-rigid aluminium lower suspension arm and specialized upper bulkhead. Fore/aft direction adjustability of both the upper and lower sections has been improved along with improved flexibility in adjusting the wheelbase and caster angle (adjustable from 0 to 16.6 degrees). The lower rod end attachment has been designed so that the tread can be adjusted with ease to precisely position the wheel. Furthermore, this kit comes standard with the optional grade-up conversion kits 1 & 2 for DIB. With the two conversion kits installed, the front/rear bulkheads and center bulkhead become aluminium parts, contributing to the increased rigidity and high-end aesthetics.

View more images and details here


August 18, 2014

Beamcat VBC D06 quick release battery mount

Beamcat VBC D06 quick release battery mount

New from Beamcat for the VBC D06 chassis is the quick release battery mount. With mounting brackets made from 7075 aluminium and using high strength industrial grade velcro, the system is a direct fit to the D06 chassis without any modification replacing the need to use tape to hold down the battery.

View the mounted system here


August 17, 2014

CRC WTF-1 Formula chassis

CRC WTF-1 Formula chassis

Building on the winning heritage from the multi-champion line of 1/12th and 1/10th road cars, the new WTF-1 from CRC elevates F-1 racing to the next level offering new and exciting features. Features that include CRC’s infinitely adjustable Slider Rear Pod, dual damper tube system, the F-1 Pro-Strut adjustable front end, a full ball bearing graphite Pro-diff and a best-in-class rear damper, the CRC Encore shock. The roll center, ride height, camber, caster, preload, droop and spring rate are all adjustable. Available soon.

View more images of the WTF-1 here


August 16, 2014

Arrowmax Ultra Step ride height & droop gauge

Arrowmax Ultra Step ride height & droop gauge

Arrowmax has released this new ride height / droop gauge combo for touring cars. Made from anodised aluminium the ride height gauge has a range from 2mm to 8mm in 0.5mm increments while the droop gauge on the other end has a range from 0.5 to 7.5 in 1mm increments.

Source: Arrowmax [arrowmax-rc.com]