January 30, 2024

Hobbywing XeRun XR10 Justock G3S

Hobbywing has just released its latest ‘Blinky’ speed controller, the XeRun XR10 Justock G3S.  The ESC offers more precise control and powerful performance and is suitable for 1:10 onroad and offroad zero-timing competitions.  The parameters have also been optimised, the number of which has been increased to 15 and are more in more in line with competition needs.  With wireless connection for data recording and analysis once connected to the OTA Bluetooth module you can connect to the ESC through the HW Link mobile app and turn on the real-time data recording function allowing you to view data such as throttle, voltage, current, temperature, speed, etc. in real time.  Another feature of the XR10 Justock G3S is Freewheeling.  When turned on the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off and it has better controllability around the corners.  With Multi RPM limit, you can select one of 79 RPM Limits (10000-88000RPM).  It can be programmed through the LCD programming box or OTA module making it is simple and convenient to meet  the RPM limit requirements of various competitions in the world.  Another feature is the Fan intelligent start and stop function.  When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on.  This function of  the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

View specs & more images here


January 29, 2024

Mackie wins TFTR Masters

Attracting over 80 drivers the TFTR Masters took place at Templestowe Flat Track Racers in Melbourne, Australia, where it was Awesomatix’ Jeffrey Mackie who took the big win.   The host circuit for the Australian National Championships later this year,  the always well supported event saw the entry bolstered even further as it was also the official Nationals Warm-up Race.  In qualifying Mackie, who made the switch to Awesomatix from ARC for 2024, would secure the pole topped 2 of the 4 qualifiers to secure the TQ ahead of the Xray of Jordan Isergin.   In Sunday’s four rounds of finals, Mackie would convert his TQ into victory after withstanding some huge pressure from the Yokomo of reigning National Champion Simon Nicholson to win the opening three legs.   Winning the fourth & final A-Main, Isergin would claim second overall with Nicholson completing the podium.

Source: RC Maker [Facebook]


January 29, 2024

Agartha Works IR18 1:10 INDY Car body

New from Japanese company Agartha Works is the release of this modern-looking 1:10 INDY car body known as the IR18.  The body is made up of multiple parts to achieve complex modeling and realistic look.  It is compatible with F1 chassis with wheelbase 270mm such as the F104 and is exclusively sold at kimihiko-yano.net online shop.

View more images here


January 29, 2024

T-works X4’24 Dual Ball Bearing Front Driveshafts

New from T-Works are these Dual Ball Bearing Front Driveshafts intended for use on Xray’s X4’24 and X4F ’24 1:10 Electric Touring Cars.  The 48.5mm driveshafts feature a heavy duty coupler with ball bearings providing a smoother motion especially on maximum steering.  The second set of bearings on each shaft controls the motion from suspension movement.

Source: T-Works [rc-tworks.com]


January 26, 2024

Nova Engines R9R Outlaw .24 Onroad engine

New from Italian engine manufacturer Nova Engines is the R9R Outlaw .24 Onroad engine which has been developed and released with purpose to give racers a powerful and easy to run Onroad engine.  As Andrea Rossi explains, which is a widely a common concern expressed by all the engine manufacturers and was a big discuss at the Wiorlds in Japan, today’s 1:8 category is suffering as costs, tuning problems and engines reliability make this category more and more difficult.  Nova Engines believe that using a different engine which provide better power, reliability and fuel mileage will allow club racers and hobby people to better enjoy their passion.  They are also want to put the attention of Federations on this option and open a discussion to implement the rules to better fit customers needs.

View technical data & more images here


January 26, 2024

MIP Gen 2 Tools

Renowned tool manufacturer MIP has released a new Gen2 line-up of its much sought after RC tools.  The latest tools from Eustace Moore’s California based company get laser-Etched sizing so you can ditch the guesswork.  Every tool displays its size in bold, clear lettering.  They have also simplified identification.  Say goodbye to Wrench Wraps as every tool now boast colour-coded rings for effortless size distinction. MIP has also enhanced durability of the Nut Drivers trading their shiny nickel plating for a tough, black Oxide coating, offering superior corrosion resistance and longer-lasting performance.  The turnbuckles have undergone a size boost, featuring a larger shank for added grip and easier tightening/loosening.

View more images here


January 25, 2024

Capricorn LAB GT2 GP 2024 1:8 GT – Images

After presenting images of the latest version of its European Championship winning 1:8 eGT chassis the LAB GT2 EP 2024 yesterday, Capricorn have now released pictures of the new 2024 version of their Nitro GT chassis.  The Italian manufacturer will be hoping the car will put them in contention for a title double at this year’s EFRA European Championships at the Naxos World Track in Italy at the start of June as they look to add a Nitro 1:8 GT title to their 1:8 and 1:10 Onroad European victories after becoming inaugural 1:8 eGT Champions in Croatia last year.

View more images here


January 25, 2024

Fenix G12.2 1:12 Chassis

Fenix Racing has introduced its latest chassis with the release of its new 1:12 G12.2.  Replacing the Italian manufacturer’s previous G12 kit, the lighter G12.2 gets revised V-Link rear suspension as well as a revised weight distribution on the rear end.  The battery is now recessed to reduce the centre of gravity and can be moved fore/aft by 3mm, altering the weight distribution.  With a new front end and revised front track the chassis is ready to accept both, suspended steering servo or “bolt-on” steering servo.  The kit includes a big bore main shock.

view more images here


Mibosport
VP Racing
T-Works