Team Titan introduce the updated V2 version of the Blitz bodyshell height adjusters. Usable on virtually every touring car chassis with 6mm body mounts, the latest variant of the body height adjusters features O-ring equipped adjustment nuts to securely keep the chosen height even in intense racing action. Included in the set come four threaded tubes for the body mounts, four height adjustment nuts and four rubber O-rings.
Source: Team Titan [team-titan.com.tw]
Radtec RC is a new brand for competition grade RC after market parts and the first products to hit the light of the day are a series of spring steel driveshafts and spool cups for the Xray T4 and Yokomo BD7 series cars. Available for the T4 are 52mm front and 50mm rear double joint driveshafts as well as steel solid axle drive cups. For the BD7 Radtec RC offers 45.5mm front and 44mm rear double joint driveshafts along suitable steel spool drive cups. All parts are made from Radtec RC’s premium steel and they come hard-coated for a smooth and long-lasting finish.
Click here to view more photos
New from Solaris comes the Instant Glue specially formulated for the use with rubber tyres. Used on Solaris’ pre-mounted spec and controlled racing tyres the CA glue is now available in 20g bottles, ideal for any rubber tyre come on-road or off-road. Included come several nozzles for easy application and a needle-equipped cap.
Source: Solaris [solarisrp.com]
Xray introduce the all-new X10 200mm pan car in 2015 specification. First of all the car features a redesigned chassis with improved weight balance and an overall narrower appearance. The chassis accepts a standard 2S LiPo pack with the speedo and receiver sitting on the wider front part of the chassis while 1S packs allow to mount the electronics in-line in front or behind the battery. The narrower chassis also sports a more centrally placement of the rear links, resulting in increased steering response and improved side-to-side balance. A new narrower and ultra lightweight motor pod adds to the more agile handling the 2015 Spec car allows. Another new feature to the rear end are improved roll tube dampers with an aluminium outer tube and inner delrin rods for highest possible precision.
Click here to continue reading
Yeah Racing have a new option part for the Axial SCX10 crawler and a multi-functional foam tape available. Starting with the SCX10 part, the rear aluminium bumper plate is made to add stability to the rear section of the ladder frame chassis while offering a cool new look at the same time. Coming blue anodised to match the remainder of Yeah Racing SCX10 related parts, the plate is a drop fit and does not require any modification.
Click here to continue reading
New from Xray comes this 1-piece rear front lower suspension mount for the rear end of the T4 touring car. Designed to replace the standard split mount with a single piece holder, the part is best used on high-grip surfaces as it is made to improve steering and rotation into corners. Another benefit of the mount is a higher rigidity in crashes as the 7075 alloy part securely stays in place. The holder comes orange anodised and it is a direct replacement for the standard split mounts.
Click here to view a photo of the part in place
KO Propo have two new low-profile servos available in the form of the BSx2 one10 Response (0.08s/13.3kg-cm) and the BSx2 one10 Power (0.10s/17.8kg.cm). Both are designed for 1/10th electric or nitro applications, they feature brushless motors and special aluminium gears with the Response being equipped with a plastic 1st gear. The servos are programmable via PC for further fine tuning and are usable with 6V to 7.4V input.
Click here to the other new servo
After two years of development Matrix introduce a new line of carpet touring car tyres. Carpet specific compounds will make for very high grip in combination with high durability that allows to do more than 30 runs on a set of tyres without problems. The tyres are glued on a fully automatic line to ensure reliable bonding and a high quality standard. Beside the carpet line of tyres Matrix will soon also have asphalt-specific pre-mounts available.
Source: Matrix [matrixtires.it]
