Red RC » P On Road

April 28, 2023

Mugen MTC-2R Touring Car

Mugen Seiki has announced their latest 1:10 Electric Touring Car, the MTC2R. The new car is an evolution of the successful MTC-2 platform used by Ronald Völker to win the ETS championship two years in a row. Now the next generation MTC-2R has several updates and improvements. Volker, designer & racer Robert Pietsch, Eric Dankel together with the whole development team tested extensively on different surfaces and conditions to develop the MTC-2R.

View features and more images here

April 28, 2023

Wallace Motorsports ‘Hall of Fame’ O.S. Speed T12

In it’s latest collaboration between O.S. Speed and SMJ, Wallace Motorsports has produced this ‘Hall of Fame’ Edition T1204. Based off of the super successful O.S. T1204 engine, it gives customers the option to purchase a ‘Hall of Fame’ .12 engine or .21 engine. The T1204 has more torque in the low-middle range with better performance. Two tungsten weights are embedded in the counterweight of the newly designed crankshaft, which helps performance in the middle range. The cooling head with wider fin pitch improves cooling efficiency.

View more images here

April 28, 2023

Capricorn 1:8 Onroad springs

Capricorn has added three new springs to its range for 1:8 Onroad racing. Green Silver are a progressive front spring which provides a nice feeling car to drive providing more consistent lap times. Purple rear springs provide the most rotation in the corners, these springs have been a popular option for the Capricorn Factory team as well as other competition teams. Green being slightly harder than Purple, provides more stability and a little less rotation.

Source: Capricorn [capricornrc.com]

April 27, 2023

Capricorn RC Bicompound 2 speed shaft

Capricorn RC has released a new Bicompound 2 Speed shaft made up of both steel and ergal. The new shaft is available for 1:8 in different versions, 8mm gearbox and 6mm gearbox from the successful 1:10 C04 platform, and fits on the 1:8 804 chassis but is also available for the C04 1:10 nitro car kit. Being 85% lighter, the advantages of the bicompound shaft are more acceleration, more top speed, better fuel economy and the transmission runs more free.

Source: Capricorn [capricornrc.com]

April 27, 2023

Awesomatix A800R New Parts

Awesomatix has released a number of new parts for their A800R 1:10 Electric Touring Car. New ST05-R Damper Rods add “friction type” damping into the suspension operation. ST05-R slides along ST102 with noticeable friction at suspension travel. Friction damping feature more compression of suspension = more damping, even at low speed of suspension. Oil damping feature more speed of suspension travel = more damping. Small damping at low speed of suspension. With ST05-R the car rolls and dives slower and responds to the steering input faster. A800R damper settings which were good with ST205 rods, should be 10…25% softer when using ST05-R. Also new are the AT143 ARB Stiffeners which increases stiffness of the anti-roll bar up to one step. +1 step stiffness increasing means that 1.0 mm bar acts like 1.1 mm bar, 1.1 mm bar acts like 1.2 mm bar, 1.2 mm bar acts like 1.3 mm bar and 1.3 mm bar acts like 1.4 mm bar. 1/2 and 1/4 steps of increasing are possible to set.

Continue reading and more images here

April 26, 2023

OfficinaRC introduce Aero-B aero bumpers

Best known for their high precision screws, OfficinaRC has introduced the Aero-B range of aero bumpers for electric touring car. The Aero-Bumper project was born with the idea of not leaving unexplored the solution of using airflow to increase performance on scale models. It is no secret that in recent years aerodynamics has perhaps been the aspect that has most influenced motorsport in general. From this consideration, Aero-B was born – Bumpers designed to channel air onto the front end and increase steering control at medium and high speeds. In addition to the aerodynamic aspect, a lot of work has been done in the choice of materials to create it. In fact, Aero-B is created using 3D printing with MSLA resin printing technology using a combination of ABS+TPU techno-polymers that give it good resilience with a lightweight. As always for OfficinaRC products, the design of these products makes the model’s look even more appealing. The Aero-B bumpers are available for Awesomatix’ A800R (7.3g), A800MMX (6.7g) and A800FX (6.7g) and the Xray X4 and X4F (6.2g). This product is aimed at those who are looking for performance in detail, not just pure resistance.

View more images of Aero-B range here

April 26, 2023

Infinity Ultra High Speed Fuel Gun

Creation Model has released this Infinity Ultra High Speed Fuel Gun which features a faster fuel release than any of its predecessors. Two options of the fuel gun are available, the traditional gun type and a side-trigger type with intuitive, straight-forward access to the fuel tank. Several mechanics used this Ultra High Speed Fuel Gun at the 2022 1:10 Nitro Touring World Championships in Bangkok, helping Naoto Matsukura get the TQ and Tadahiko Sahashi the overall World Championship.

View more images here

April 26, 2023

AGFRC Mini Z Gyro V3.5

In a series of new product releases, servo manufacturer AGFRC has introduced a new 3.5 version gyro intended for the Mini-Z. This premium product features a fully CNC aluminium case offering both fast cooling and great protection. Just 21 x 15 x 8.8mm in size and weighing 4 grams the V3.5 offers a better user experience. It has added extra features that it can support PWM follow mode and has great compatibility with auto adaptive for analog and digital servo. Supporting most of the popular control system it is perfect for most devices on the market. It is almost ready to run as you can also do adjustment of EPA or Gain mode to suit your cars. To match your Mini Z, the GY04M-V3.5 is available black, red or purple.

View more images here