Red RC » P On Road

November 27, 2014

Team C TC10 hard steering knuckles & rear hubs

Team C have more hard compound suspension parts available for the TC10 touring car kit. Following reinforced front and rear lower A-arms and C-hubs the company will soon also release hard steering knuckles and rear hubs. The parts come in handy when racing in high ambient temperatures or on high-bite tracks as the special composite material tends to flex less, resulting in a more precise steering feeling and improved rear traction. The suspension parts come as pairs and are direct replacements with the steering knuckles also offering an updated geometry with new steering Ackermann settings and added arm length.

Click here to view the rear hubs

November 27, 2014

Team Associated B5 series titanium screw sets

New from Team Associated and made for the B5 and B5M are two new titanium screw sets. Containing 66 (B5) or 83 (B5M) high-quality fasteners the sets reduce the overall weight of the buggies while adding some bling and strength at the same time. The various button and flathead screws are also available separately as 4-piece sets to outfit other cars, buggies and trucks.

Source: Team Associated [teamassociated.com]

November 27, 2014

Avid Triad M4 lightweight wheel nuts

Avid introduce the Triad M4 wheel nuts for the use with most 1/10th scale vehicles. The lightweight nuts weigh in at only 0.3g per piece and although they sport a unique 3-corner design they can be cranked down with force when a good quality nut wrench is used. Serrations ensure the nuts stay in place while the available colours of black, blue, orange and red let you highlight your drive. The nuts come in sets of four including an Avid mini decal sheet.

Click here to view the colour variants

November 26, 2014

Xray T4’15 graphite ARS rear A-arm

Xray T4'15 graphite ARS rear A-arm

Made for the use with ARS converted T4’15 cars is this graphite-reinforced rear suspension arm. Offering the same geometry and 1-hole specification as the standard kit arm, the special graphite compound makes for improved rigidity, making the arm ideal for the use in high ambient temperatures or when running on high-bite surfaces. Additionally the arm, that is usable on the left and right hand side of the car, improves traction and stability in normal grip conditions too.

Source: Xray [teamxray.com]

November 26, 2014

GRP pre-glued 1/10th formula tyres

Italian company GRP introduce their new line of pre-glued tyres for 1/10th scale formula chassis. Offering a unique wheel design with a larger inner diameter of 39mm and a smaller outer diameter of 30mm the tyres offer a precise handling and improved on-track performance without sacrificing scale looks. Coming in S2 high-grip compound the tyres are available as 33.5mm wide front and 38.5mm wide rear offerings, pre-mounted on carbon reinforced F104-compatible 6-spoke rims with water-cut foam inserts. The pre-scuffed tyres are usable immediately and do not require to be run-in or pre-sanded before use.

Click here to view another photo

November 26, 2014

KM H-K1 Evo3 steel & aluminium rear driveshafts

KM have a new option part for the H-K1 200mm nitro on-road car available in the form of red steel and aluminium driveshafts. The parts improve the drivetrain efficiency due to a low weight while the red steel wheel axles maximise durability. Using the universal shafts improves rear stability and also does away with the need to use O-rings in the differential outdrives. For maintenance reasons the aluminium dogbones are also available separately.

Click here to view another photo

November 25, 2014

Yuki Model Borsti 45A brushed speed controller

Yuki Model introduce the Borsti 45A brushed speed controller. Offering up to 45A constant and 340A peak current, the 2S LiPo-compatible controller measures 38x28x2mm and it weighs in at 40g. The speedo features low-voltage and over-temperate protection, a 2A/5.8V BEC system and it comes pre-wired with Tamiya-style battery and motor connectors.

Source: CN-Group [cn-group.de]

November 25, 2014

Team C TC10 hard plastics & 4 degree arm mount

Team C have new option parts available for the TC10 touring car in the form of hard compound suspension parts and a new 4 degree rear arm mount. Starting with the plastics, they are made from a special hard compound to reduce flex under load such as it occurs when running in high bite conditions. Available are front and rear lower A-arms as well as front 4 degree caster C-hubs. The parts come also come in handy when running in high ambient temperatures. Another new item is the 4 degree rear arm mount. The aluminium part comes orange anodised and laser-etched for easy identification. All parts fit both the TC10 competition and TR10 budget touring car.

Click here to view the other new parts