Red RC » P On Road

March 24, 2014

SkyRC Toro TS50 brushless sensored ESC

New from SkyRC comes the Toro TS50 sensored brushless speed controller. The lightweight ESC is good for the use with down to 8.5T motors in on-road cars and 11.5T motors in buggies due to his 50A rating. The controller features a blue anodised aluminium heatsink case, it can take an optional fan unit and offers a 6V/2A BEC system. It can be widely programmed using the on-board programming feature or SkyRC’s optional programming box or SkyLink USB interface to adapt the punch and brake curves to your liking.

Source: SkyRC [skyrc.com]

March 24, 2014

Tenshock WP-EX4 V2 brushless speed controller

Tenshock introduce their new WP-EX4 V2 brushless speed controller for both 1/10th and 1/8th scale applications. The 120A rated ESC is good for 2S use with up to 6000kv motors and 3S packs with up to 4000kv, making it ideal for short course trucks and buggies in bashing and racing applications while the controller can also handle up to 3000kv motors with 4S input, allowing the use in lightweight 1/8th buggies. Coming in a cast hardcase measuring 55×37.6×38.4mm the controller is waterproof for all-weather usability and it offers a 6V/5A BEC system and integrated cooling fan.

Click here to view more photos

March 21, 2014

Pirani RC The Roller adjustment tool

Italian company Pirani RC now have a helpful tool called The Roller available. Designed to fit a wide range of drivers the small cylinder is simply slid over the tool tip and a combination of 8 markings and an air bubble helps to make exact 1/16th or 1/8th of a turn adjustments to toe and camber angle adjustment screws and pivot balls. At only 20mm diameter it is also very handy and easy to store.

Source: Pirani RC [piranirc.com]

March 20, 2014

Samix TRF418 chassis conversion kit

New company Samix introduce their first option part in the form of a chassis conversion kit for the Tamiya TRF418. The kit is based on a 82mm wide and 2.35mm thick carbon fibre chassis that is slightly softer and narrower than the TRF kit part to make for more torsional flex and higher corner speed without having to worry about the chassis plate bottoming out during heavy cornering. Included with the matte-finish chassis is also a blue anodised aluminium steering post stiffener, a blue anodised aluminium floating motor mount, battery positioners and a spring steel layshaft. The kit already prove its performance by making the Modified TC A-main at the recent TITC event in the hands of Nicholas Lee. Samix are currently working on launching their company website and in the meantime you can find more information on their Facebook page.

Click here to view more photos

March 20, 2014

Ghea piston storage box

Ghea now have this handy storage box for 1/10th and 1/8th shock pistons and other small parts available. Measuring 98x40mm the box offers a total of 10 compartments that make storage and transportation of small parts easy. The box is topped of by a sliding transparent lid.

Source: Ghea [ghea.se]

March 20, 2014

MD Racing MDF14 formula 1 chassis kit

We recently brought you first CAD rendering of the Spanish MD Racing MDF14 1/10th formula 1 chassis and now a first pre-production image os available. Based on a carbon fibre main chassis the vehicle will feature a U-shaped top deck that connects behind the battery compartment, a front aluminium bulkhead makes for step-less caster angle adjustment while a rail-type rear pod design allows to adjust the ground clearance with the help of grub screws located in the rear axle inserts and motor mount. The depicted car is a prototype with the actual kits will contain gold-anodised aluminium parts, aluminium body mounts, aluminium preload nuts for the side springs and thumb screw supported battery mounts from what is understood.

Source: MD Racing [facebook.com]

March 20, 2014

Muchmore Fleta ZX 13.5T fixed timing brushless motor

Muchmore’s Fleta ZX 13.5T Type-W brushless motor is now also available in a fixed timing version. The hand-out motor of the 2013/14 ETS Pro Stock class builds on the same design as the conventional stock motors but comes with a fixed timing endbell making it ideal for zero timing club races, regional and national championships alike.

Source: Muchmore [muchmoreracing.net]

March 19, 2014

MCD Racing camber & ride height gauges

MCD Racing have new setup tool for large scale cars available in the form of a camber and ride height gauge. The camber gauge allows measuring the wheel’s camber angles in a -10 to +10 degree range while the ride height tool measures in a 20mm to 70mm range. An extended arm allows to virtually measure on all parts of the chassis for improved usability and precision. The tools are made from high-impact plastic and work with 1/5 and 1/6 scale cars, buggies and trucks.

Click here to view the ride height gauge