Red RC » P On Road

March 20, 2014

MD Racing MDF14 formula 1 chassis kit

We recently brought you first CAD rendering of the Spanish MD Racing MDF14 1/10th formula 1 chassis and now a first pre-production image os available. Based on a carbon fibre main chassis the vehicle will feature a U-shaped top deck that connects behind the battery compartment, a front aluminium bulkhead makes for step-less caster angle adjustment while a rail-type rear pod design allows to adjust the ground clearance with the help of grub screws located in the rear axle inserts and motor mount. The depicted car is a prototype with the actual kits will contain gold-anodised aluminium parts, aluminium body mounts, aluminium preload nuts for the side springs and thumb screw supported battery mounts from what is understood.

Source: MD Racing [facebook.com]

March 20, 2014

Muchmore Fleta ZX 13.5T fixed timing brushless motor

Muchmore’s Fleta ZX 13.5T Type-W brushless motor is now also available in a fixed timing version. The hand-out motor of the 2013/14 ETS Pro Stock class builds on the same design as the conventional stock motors but comes with a fixed timing endbell making it ideal for zero timing club races, regional and national championships alike.

Source: Muchmore [muchmoreracing.net]

March 19, 2014

MCD Racing camber & ride height gauges

MCD Racing have new setup tool for large scale cars available in the form of a camber and ride height gauge. The camber gauge allows measuring the wheel’s camber angles in a -10 to +10 degree range while the ride height tool measures in a 20mm to 70mm range. An extended arm allows to virtually measure on all parts of the chassis for improved usability and precision. The tools are made from high-impact plastic and work with 1/5 and 1/6 scale cars, buggies and trucks.

Click here to view the ride height gauge

March 18, 2014

New Picco Torque X-Type .21 & .12 engines

Italian company Picco have two new on-road nitro engines available in the form of the Torque .21 X-Type Cer World and the Torque .12 X-Type S EdoMod. Starting with the 1/8th scale engine, the power plant features a long stroke design for further increased low and mid-range acceleration with the components having received the attention of Edoardo Picco to extract as much performance as possible from the 3.5cc engine. Other features include a 14mm Turbo crankshaft with silicone insert, an aligned knife edged conrod and a hand-finished chrom-plated brass liner. A modified backplate improves fuel flow and the piston made from high percentage silicone alloy billet further increases the performance. Last but not least the engine comes with a Swiss-quality ceramic main bearing and 8mm and 9mm venturi inserts.

Click here to continue reading

March 18, 2014

LRP S10 Twister alloy wheel adapters & servo arms

LRP have new option parts for the S10 Twister line of off-road vehicles as well as alloy servo arms available. Starting with the Twister parts, the aluminium wheel adapters are made from high-quality material and they offer increased rigidity over the stock parts. Included are also four steel drive pins and rubber O-ring to hold the pins in place. Also new are three aluminium servo arms for 23 teeth, 24 teeth and 25 teeth splines. Coming as single arm variant for steering duties and dual arm versions for throttle and brake applications in nitro cars, the arms offer increased rigidity especially when used with high-power servos for increased steering precision and brake holding power. They come blue anodised and with a pre-drilled ballstud mounting hole.

Click here to view the servo arms

March 18, 2014

Sweep Formula 1 wheels for rubber tyres

Sweep Racing have new mesh wheels for Formula 1 rubber tyres available. The grey colour wheels are compatible with most “narrow” F1 cars, offer a 44.8mm outer diameter and a width of 30mm up front and 35mm for the rear wheels. They are usable with Sweep, Tamiya, and Solaris rubber tyres with the set containing two front and two rear wheels.

Click here to view more photos

March 17, 2014

Sweep STC-4 touring car bodyshell

Sweep introduce the STC-4 190mm touring car bodyshell. Designed to meet Global Body Spec rules the TC shell is meant to offer exceptional balance, increased front and rear downforce and maximised corner speed. It will become available as 0.8mm regular weight and 0.65mm lightweight version with both including a 1mm rear wing and mounting hardware.

Click here to view more photos

March 17, 2014

Vampire Racing flat sensor wires

Vampire Racing introduce their new line of highly flexible “flat-type” sensor wires. Made from tough yet easy-to-bend wire the sensor harnesses make for tidy wiring and the highly flexible design reduces unwanted tweak when used in pan cars. The wires come in seven different length including 50mm, 75mm, 100mm, 125mm, 150mm, 175mm and 200mm, ideal for all applications from 1/8th to 1/12th scale.

Source: Vampire Racing [vampire-racing.com]